Crestron HZ2-SWEX-W – HZ2-SWEX, akkor lamba, manyetik düşük voltaj ve tungsten-hal

HZ2-SWEX, akkor lamba, manyetik düşük voltaj ve tungsten-halojen yüklerin yanı sıra elektronik balastlar ve 1/2 HP motorlar için infiNET EX® kablosuz ağ kontrolü sağlayan bir Horizon® 2 duvar içi anahtardır. Tasarımı, Horizon 2 dimmer, anahtar ve tuş takımı serisinin tamamıyla eşleşerek yeni veya so

Stok kodu: HZ2-SWEX-W Kategoriler:

HZ2-SWEX, akkor lamba, manyetik düşük voltaj ve tungsten-halojen yüklerin yanı sıra elektronik balastlar ve 1/2 HP motorlar için infiNET EX® kablosuz ağ kontrolü sağlayan bir Horizon® 2 duvar içi anahtardır. Tasarımı, Horizon 2 dimmer, anahtar ve tuş takımı serisinin tamamıyla eşleşerek yeni veya sonradan takılan kurulumlara mükemmel bir katkı sağlar. HZ2-SWEX-W, büyük bir basmalı düğme tertibatında (Stil 6) Varsayılan Gravür içerir.

Teknik Özellikler

Load Type Incandescent, Magnetic Low Voltage, Tungsten-Halogen, Electronic Ballasts, 1/2 HP Motors
Load Rating 10A maximum; No minimum load
Overvoltage Category III
Push button (9) Push buttons, located under the button assembly; Push buttons are actuated by the installed button assembly
Button Assembly (1) Button assembly included; Default engraving: Includes default engraving on a Style 6 button assembly; Custom engraving (ENGRAVED models): Includes custom engraving on any style button assembly; Compatible with Style 1–6 button assemblies NOTE: The center of a rocker-style button cannot be used to actuate a push button. Rocker buttons are included on the HZ2-BTNS-2, HZ2-BTNS-3, HZ2-BTNS-4, HZ2-BTNS-5, and HZ2-BTNS-6 button assemblies.
Setup (1) Push button; Front of the faceplate must be removed to access the push button; Can be used to set the local LED backlight color theme or calibrate the ambient light sensor
LED Feedback (5) RGB LED backlights; Supports one local color theme for all LEDs; Supports one alternate color theme for each backlit position
Light Sensor (1) Photosensor with adjustable sensitivity; Detects the ambient room light level to activate day or night mode and autodimming the backlight
RF Transceiver infiNET EX® 2‑way RF, 2.4 GHz ISM Channels 11‑26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
Range (typical) 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device; Subject to site-specific conditions and individual device capabilities
Gateway Requires a Crestron Wireless Gateway (sold separately)
Load (1) Screw clamp terminal, consists of (2) wire inserts and (1) red screw head; Load output; Accepts (1) 14-12 AWG wire per insert, do not insert wires behind screw head
Line (1) Screw clamp terminal, consists of (2) wire inserts and (1) black screw head; Line power input; Accepts (1) 14-12 AWG wire per insert, do not insert wires behind screw head
Neutral (1) Screw clamp terminal, consists of (2) wire inserts and (1) silver screw head; Neutral input; Accepts (1) 14-12 AWG wire per insert, do not insert wires behind screw head
Remote (1) Screw clamp terminal, consists of (2) wire inserts and (1) blue screw head; Remote input from HZ2‑AUX or HZ2‑KPEX ; Accepts (1) 14-12 AWG wire per insert, do not insert wires behind screw head
Ground (1) 12 AWG flying lead, Class 1, green with yellow stripe; Ground; Wire nut included
Temperature 32° to 86°F (0° to 30°C)
Humidity 10% to 90% RH (noncondensing)
Pollution Degree 2
Mounting Mounts in a 1‑ to 4-gang U.S. electrical box (not included); 3.5 in. (26 mm) electrical box depth recommended; Derating required in multigang applications
Faceplate Requires a Horizon® 2 faceplate ( HZ2‑FP‑G , sold separately, metal backplate included with faceplate); Multigang installations require a 2-, 3-, or 4-gang Horizon® 2 faceplate with metal backplate ( HZ2‑FP‑G , sold separately); The metal backplate is required for all installations where the electrical box is flush with or recessed from the wall surface; The metal backplate is not recommended for electrical boxes that protrude beyond the wall surface
Height 4.13 in. (105 mm)
Width 1.80 in. (46 mm)
Depth (Textured) 1.75 in. (45 mm) overall, extends 0.44 in. (12 mm) from wall surface when installed
Depth (Glass, Metal) 1.83 in. (47 mm) overall, extends 0.46 in. (12 mm) from wall surface when installed

Kullanım Alanları

  • Kurumsal ve ticari projelerde dimmer switch çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron HZ2-SWEX-W Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Load Type

Incandescent, Magnetic Low Voltage, Tungsten-Halogen, Electronic Ballasts, 1/2 HP Motors

Load Rating

10A maximum; No minimum load

Overvoltage Category

III

Push button

(9) Push buttons, located under the button assembly; Push buttons are actuated by the installed button assembly

Button Assembly

(1) Button assembly included; Default engraving: Includes default engraving on a Style 6 button assembly; Custom engraving (ENGRAVED models): Includes custom engraving on any style button assembly; Compatible with Style 1–6 button assemblies NOTE: The center of a rocker-style button cannot be used to actuate a push button. Rocker buttons are included on the HZ2-BTNS-2, HZ2-BTNS-3, HZ2-BTNS-4, HZ2-BTNS-5, and HZ2-BTNS-6 button assemblies.

Setup

(1) Push button; Front of the faceplate must be removed to access the push button; Can be used to set the local LED backlight color theme or calibrate the ambient light sensor

LED Feedback

(5) RGB LED backlights; Supports one local color theme for all LEDs; Supports one alternate color theme for each backlit position

Light Sensor

(1) Photosensor with adjustable sensitivity; Detects the ambient room light level to activate day or night mode and autodimming the backlight

RF Transceiver

infiNET EX® 2‑way RF, 2.4 GHz ISM Channels 11‑26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant

Range (typical)

150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device; Subject to site-specific conditions and individual device capabilities

Gateway

Requires a Crestron Wireless Gateway (sold separately)

Load

(1) Screw clamp terminal, consists of (2) wire inserts and (1) red screw head; Load output; Accepts (1) 14-12 AWG wire per insert, do not insert wires behind screw head

Line

(1) Screw clamp terminal, consists of (2) wire inserts and (1) black screw head; Line power input; Accepts (1) 14-12 AWG wire per insert, do not insert wires behind screw head

Neutral

(1) Screw clamp terminal, consists of (2) wire inserts and (1) silver screw head; Neutral input; Accepts (1) 14-12 AWG wire per insert, do not insert wires behind screw head

Remote

(1) Screw clamp terminal, consists of (2) wire inserts and (1) blue screw head; Remote input from HZ2‑AUX or HZ2‑KPEX ; Accepts (1) 14-12 AWG wire per insert, do not insert wires behind screw head

Ground

(1) 12 AWG flying lead, Class 1, green with yellow stripe; Ground; Wire nut included

Temperature

32° to 86°F (0° to 30°C)

Humidity

10% to 90% RH (noncondensing)

Pollution Degree

2

Mounting

Mounts in a 1‑ to 4-gang U.S. electrical box (not included); 3.5 in. (26 mm) electrical box depth recommended; Derating required in multigang applications

Faceplate

Requires a Horizon® 2 faceplate ( HZ2‑FP‑G , sold separately, metal backplate included with faceplate); Multigang installations require a 2-, 3-, or 4-gang Horizon® 2 faceplate with metal backplate ( HZ2‑FP‑G , sold separately); The metal backplate is required for all installations where the electrical box is flush with or recessed from the wall surface; The metal backplate is not recommended for electrical boxes that protrude beyond the wall surface

Height

4.13 in. (105 mm)

Width

1.80 in. (46 mm)

Depth (Textured)

1.75 in. (45 mm) overall, extends 0.44 in. (12 mm) from wall surface when installed

Depth (Glass, Metal)

1.83 in. (47 mm) overall, extends 0.46 in. (12 mm) from wall surface when installed

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron HZ2-SWEX-W – HZ2-SWEX, akkor lamba, manyetik düşük voltaj ve tungsten-hal” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top