Crestron CLX-2DIMU8 – 120 Volt konut aydınlatma uygulamaları için teknolojik olara

120 Volt konut aydınlatma uygulamaları için teknolojik olarak gelişmiş sekiz kanallı evrensel karartma sağlar. LED, akkor lamba, manyetik düşük voltaj, elektronik düşük voltaj ve 2 telli kısılabilir floresan aydınlatma yüklerini destekler. Eksiksiz Crestron® merkezi aydınlatma kontrol sisteminin bir

Stok kodu: CLX-2DIMU8 Kategoriler:

120 Volt konut aydınlatma uygulamaları için teknolojik olarak gelişmiş sekiz kanallı evrensel karartma sağlar. LED, akkor lamba, manyetik düşük voltaj, elektronik düşük voltaj ve 2 telli kısılabilir floresan aydınlatma yüklerini destekler. Eksiksiz Crestron® merkezi aydınlatma kontrol sisteminin bir parçası olarak CAEN veya CAEN-MLO duvara monte otomasyon muhafazasına kurulur.

Teknik Özellikler

Dimmer Channels 8
Dimmable Load Types LED, incandescent, electronic low voltage, magnetic low voltage [1] , 2-wire fluorescent
Switched Load Types Non-dimmable lighting [1]
Per Channel Load Rating 4 Amps (480 Watts)
Per Group Load Rating Group 1 (Channels 1-4): 16 Amps; (1,920 Watts) Group 2 (Channels 5-8): 16 Amps (1,920 Watts)
Module Total Load Rating 32 Amps (3,840 Watts) [2]
Minimum Load 0 Watts
Line/Load Voltage 120 Volts AC, 60 Hz; requires one or two single-phase feeds (may be same or different phases)
SCCR 30 kA
Via Terminal Block (sold separately) LINE 1 – 2: (2) Screw terminals, black, line power feed inputs (per group); DIM 1 – 8: (8) Screw terminals, red, load outputs (per channel); N IN 1 – 2: (2) Screw terminals, white, line power feed neutrals (per group); N OUT 1 – 8: (8) Screw terminals, white, load neutrals (per channel); Note: Each terminal accepts one 14-10 AWG wire.
Module Interconnect (2) 5-pin 0.156 inch headers; Cresnet/Override interconnect ports; Each connects to the adjacent module using the interconnect jumper provided; Connects to a CAEN-BLOCK (sold separately) when installed in the lowest position within the enclosure
PWR (1) Green LED, indicates line power is applied to the LINE 1 terminal
NET (1) Yellow LED, indicates Cresnet communication with the control system
MODE (not labeled) (1) Pushbutton, selects the dimming mode when in Local mode
SETUP (1) Pushbutton, used to enter Local mode and test each channel
1 – 8 (8) Tri-color LEDs, each indicates the status, dimming mode, or error condition for the corresponding channel
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 12 BTU/hr + (3.41 BTU/hr x Load Current in Amps); 121 BTU/hr at maximum load
Height 7.63 in (194 mm)
Width 6.92 in (176 mm)
Depth 3.43 in (87 mm)

Kullanım Alanları

  • Kurumsal ve ticari projelerde clx modules çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron CLX-2DIMU8 Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Dimmer Channels

8

Dimmable Load Types

LED, incandescent, electronic low voltage, magnetic low voltage [1] , 2-wire fluorescent

Switched Load Types

Non-dimmable lighting [1]

Per Channel Load Rating

4 Amps (480 Watts)

Per Group Load Rating

Group 1 (Channels 1-4): 16 Amps; (1,920 Watts) Group 2 (Channels 5-8): 16 Amps (1,920 Watts)

Module Total Load Rating

32 Amps (3,840 Watts) [2]

Minimum Load

0 Watts

Line/Load Voltage

120 Volts AC, 60 Hz; requires one or two single-phase feeds (may be same or different phases)

SCCR

30 kA

Via Terminal Block (sold separately)

LINE 1 – 2: (2) Screw terminals, black, line power feed inputs (per group); DIM 1 – 8: (8) Screw terminals, red, load outputs (per channel); N IN 1 – 2: (2) Screw terminals, white, line power feed neutrals (per group); N OUT 1 – 8: (8) Screw terminals, white, load neutrals (per channel); Note: Each terminal accepts one 14-10 AWG wire.

Module Interconnect

(2) 5-pin 0.156 inch headers; Cresnet/Override interconnect ports; Each connects to the adjacent module using the interconnect jumper provided; Connects to a CAEN-BLOCK (sold separately) when installed in the lowest position within the enclosure

PWR

(1) Green LED, indicates line power is applied to the LINE 1 terminal

NET

(1) Yellow LED, indicates Cresnet communication with the control system

MODE (not labeled)

(1) Pushbutton, selects the dimming mode when in Local mode

SETUP

(1) Pushbutton, used to enter Local mode and test each channel

1 – 8

(8) Tri-color LEDs, each indicates the status, dimming mode, or error condition for the corresponding channel

Temperature

32° to 104° F (0° to 40° C)

Humidity

10% to 90% RH (non-condensing)

Heat Dissipation

12 BTU/hr + (3.41 BTU/hr x Load Current in Amps); 121 BTU/hr at maximum load

Height

7.63 in (194 mm)

Width

6.92 in (176 mm)

Depth

3.43 in (87 mm)

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron CLX-2DIMU8 – 120 Volt konut aydınlatma uygulamaları için teknolojik olara” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top