Crestron CLB-120-20A-AFCI – CAEN-MLO otomasyon muhafazaları için termik manyetik, birleş

CAEN-MLO otomasyon muhafazaları için termik manyetik, birleşik ark arızası ve toprak arızası tipi devre kesicilerin seçimi.

Stok kodu: CLB-120-20A-AFCI Kategoriler:

CAEN-MLO otomasyon muhafazaları için termik manyetik, birleşik ark arızası ve toprak arızası tipi devre kesicilerin seçimi.

Teknik Özellikler

Blink Pattern Description
0 Mechanical Disconnect – The breaker has detected an overload, short circuit, or was manually turned off.
1 Low Current Arc – A low current "series" arc has been detected within one of the current pathways. These arcs are typically found in worn or degraded appliance and extension cords, poor connections in appliances or fixtures, or in contacts within equipment.
2 High current Arc – A high current "parallel" arc has been detected between two conductors. These arcs are usually found in installed wiring where the wire has been compromised by a nail or screw, an over tightened staple, or damaged insulation.
3 Short Delay – Short delay is an electronic backup to the short circuit mechanism.
4 Overvoltage – A voltage of 160V RMS or greater has been detected. After resetting the breaker, press the "TEST" button to verify the breaker is working properly.
5 Ground Fault – The breaker has detected that current has found an alternate path to ground.
6 Self Test Failure – The breaker continually tests its internal electronics and software to ensure the arc fault detection technology is working properly. The breaker will trip in the event of a self test failure.

Kullanım Alanları

  • Kurumsal ve ticari projelerde aksesuarlar çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron CLB-120-20A-AFCI Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

1

Low Current Arc – A low current "series" arc has been detected within one of the current pathways. These arcs are typically found in worn or degraded appliance and extension cords, poor connections in appliances or fixtures, or in contacts within equipment.

2

High current Arc – A high current "parallel" arc has been detected between two conductors. These arcs are usually found in installed wiring where the wire has been compromised by a nail or screw, an over tightened staple, or damaged insulation.

3

Short Delay – Short delay is an electronic backup to the short circuit mechanism.

4

Overvoltage – A voltage of 160V RMS or greater has been detected. After resetting the breaker, press the "TEST" button to verify the breaker is working properly.

5

Ground Fault – The breaker has detected that current has found an alternate path to ground.

6

Self Test Failure – The breaker continually tests its internal electronics and software to ensure the arc fault detection technology is working properly. The breaker will trip in the event of a self test failure.

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron CLB-120-20A-AFCI – CAEN-MLO otomasyon muhafazaları için termik manyetik, birleş” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top