Crestron GLXX-2DIM8 — 8 Kanallı Dimmer Modülü [Teklif Çağrısı]

GLXX 2DIM8, sekiz kanallı akkor lamba, manyetik düşük voltaj, 2 telli floresan balast ve LED karartma özelliklerine sahip bir Crestron Green Light Express® karartma modülüdür. Ayrıca dört kanallı 3 telli floresan balast karartma özelliği sunar. Modül, Crestron® tarafından tasarlanmış eksiksiz bir GL

Stok kodu: GLXX-2DIM8 Kategoriler: Glex Modules

Öne Çıkan Özellikler

8 kanallı akkor lamba, MLV, ELV, 2 telli floresan, LED karartma veya 4 kanallı 3 telli floresan balast karartma
Faz-Senkron algılama, lamba titremesini ortadan kaldırır
Seçilebilir loş, 3 kablolu floresan ve loş olmayan modlar
100 – 277 V uygulamalarını destekler
Kanal başına 16 A yük değeri
Kısa devre ve aşırı yük koruması
Her çıkışta pozitif hava boşluğu
Fazdan bağımsız kanallar
Crestron® kontrol sistemine bağlantı için Cresnet® iletişimleri
Yedekli güç özelliği – modül hat veya Cresnet aracılığıyla güç sağlar
Test ve doğrulama için yerel kontroller
Yerel ve uzaktan geçersiz kılma özelliği
Kalıcı elektrik kesintisi belleği

Teknik Özellikler

Primary	100‑277 VAC, 50/60 Hz, supplied via L1-N1; 100‑277 VAC, 50/60 Hz, supplied via L2-N2
Secondary (Optional)	5 W at 24 VDC, supplied via Cresnet® communication
Dimmer Channels	8
Load Rating	16 A per channel; 32 A total (maximum)
Lighting Load Rating	Group 1 (DM 1-4): 16 A, 1920 W; Group 2 (DM 5-8): 16 A, 1920 W
Motor Load Rating	Group 1 (DM 1-4): 1 HP at 120 V, 2 HP at 230/277 V; Group 2 (DM 5-8): 1 HP at 120 V, 2 HP at 230/277 V
Minimum Load	25 W
Dim Load Types	Incandescent, magnetic low‑voltage, electronic low‑voltage (forward-phase or leading edge transformers only), neon/cold cathode, 2‑wire fluorescent ballast, 3‑wire fluorescent ballast (uses adjacent channel for 3rd wire, i.e. channels 1 & 2 are to be used for one 3‑wire load), LED
Switch Load Types	Incandescent, magnetic low‑voltage, electronic low‑voltage, neon/cold cathode, fluorescent ballast, high‑intensity discharge, LED, motor
NET (24 Y Z G)	(2) 4-pin 3.5 mm detachable terminal blocks, Cresnet port; Connection to control system or daisy-chain to additional Cresnet devices
NET (24 Y Z G OVR)	(2) 5-pin headers, Cresnet port with override; Connects to adjacent module or internal connecting block using the supplied interconnect cable
OVR	(1) LED and (1) miniature pushbutton; Miniature pushbutton enables Override mode and saves Override presets
L1 – N1	(1) 2-position terminal block; Connections must be made to power device; Provides power to DM1-DM4; Line input, power (L1); Line input, neutral (N1); 26-10 AWG wire; Torque to 5.31 lb-in. (0.6 Nm)
L2 -N2	(1) 2-position terminal block; Provides power to DM5-DM8; Line input, power (L2); Line input, neutral (N2); 26-10 AWG wire; Torque to 5.31 lb-in. (0.6 Nm)
DM1 – DM8	(4) 2-position terminal blocks; Dim channel outputs; 26-10 AWG wire; Torque to 5.31 lb-in. (0.6 Nm)
NET ID	(2) 7‑segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID; 7-segment LED digits light green to indicate the Cresnet ID; Miniature pushbuttons set the Cresnet ID, left button controls the left digit, right button controls the right digits
SETUP	(1) LED and (1) miniature pushbutton; Miniature pushbutton enables Setup mode and sets the touch-settable ID; LED lights red to indicate that Setup mode is enabled
PWR	(1) LED; Lights green to indicate that power is applied to N1 and L1; Flahses green to indicate Cresnet power is supplied in absence of line power
NET	(1) LED; Lights yellow to indicate communication with control processor
RESET	(1) Recessed miniature pushbutton; Press to reset internal processor
1-8	(8) LEDs and (8) miniature pushbuttons, (1) per channel; Miniature pushbuttons control individual channels; LEDs light red to indicate that the channel is on
DIM/3 WIRE FL/NON-DIM	(8) Recessed miniature switches, (1) per channel; Sets the dimming mode to DIM, 3 WIRE FL, or NON-DIM; DIM: Module will accept dim commands; 3 WIRE FL: Adjacent channel in terminal block will be used for 3rd wire; NON-DIM: Module will act as a switch (necessary for motor loads)
Temperature	32° to 104° F (0° to 40° C)
Humidity	10% to 90% RH (noncondensing)
Heat Dissipation	154 BTU/hr
Height	11.07 in. (281 mm)
Width	7.99 in. (203 mm)
Depth	3.50 in. (89 mm)

Kullanım Alanları

Kurumsal ve ticari projelerde glex modules çözümü
Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron GLXX-2DIM8 Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka	Crestron
Primary	100‑277 VAC, 50/60 Hz, supplied via L1-N1; 100‑277 VAC, 50/60 Hz, supplied via L2-N2
Secondary (Optional)	5 W at 24 VDC, supplied via Cresnet® communication
Dimmer Channels	8
Load Rating	16 A per channel; 32 A total (maximum)
Lighting Load Rating	Group 1 (DM 1-4): 16 A, 1920 W; Group 2 (DM 5-8): 16 A, 1920 W
Motor Load Rating	Group 1 (DM 1-4): 1 HP at 120 V, 2 HP at 230/277 V; Group 2 (DM 5-8): 1 HP at 120 V, 2 HP at 230/277 V
Minimum Load	25 W
Dim Load Types	Incandescent, magnetic low‑voltage, electronic low‑voltage (forward-phase or leading edge transformers only), neon/cold cathode, 2‑wire fluorescent ballast, 3‑wire fluorescent ballast (uses adjacent channel for 3rd wire, i.e. channels 1 & 2 are to be used for one 3‑wire load), LED
Switch Load Types	Incandescent, magnetic low‑voltage, electronic low‑voltage, neon/cold cathode, fluorescent ballast, high‑intensity discharge, LED, motor
NET (24 Y Z G)	(2) 4-pin 3.5 mm detachable terminal blocks, Cresnet port; Connection to control system or daisy-chain to additional Cresnet devices
NET (24 Y Z G OVR)	(2) 5-pin headers, Cresnet port with override; Connects to adjacent module or internal connecting block using the supplied interconnect cable
OVR	(1) LED and (1) miniature pushbutton; Miniature pushbutton enables Override mode and saves Override presets
L1 - N1	(1) 2-position terminal block; Connections must be made to power device; Provides power to DM1-DM4; Line input, power (L1); Line input, neutral (N1); 26-10 AWG wire; Torque to 5.31 lb-in. (0.6 Nm)
L2 -N2	(1) 2-position terminal block; Provides power to DM5-DM8; Line input, power (L2); Line input, neutral (N2); 26-10 AWG wire; Torque to 5.31 lb-in. (0.6 Nm)
DM1 - DM8	(4) 2-position terminal blocks; Dim channel outputs; 26-10 AWG wire; Torque to 5.31 lb-in. (0.6 Nm)
NET ID	(2) 7‑segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID; 7-segment LED digits light green to indicate the Cresnet ID; Miniature pushbuttons set the Cresnet ID, left button controls the left digit, right button controls the right digits
SETUP	(1) LED and (1) miniature pushbutton; Miniature pushbutton enables Setup mode and sets the touch-settable ID; LED lights red to indicate that Setup mode is enabled
PWR	(1) LED; Lights green to indicate that power is applied to N1 and L1; Flahses green to indicate Cresnet power is supplied in absence of line power
NET	(1) LED; Lights yellow to indicate communication with control processor
RESET	(1) Recessed miniature pushbutton; Press to reset internal processor
1-8	(8) LEDs and (8) miniature pushbuttons, (1) per channel; Miniature pushbuttons control individual channels; LEDs light red to indicate that the channel is on
DIM/3 WIRE FL/NON-DIM	(8) Recessed miniature switches, (1) per channel; Sets the dimming mode to DIM, 3 WIRE FL, or NON-DIM; DIM: Module will accept dim commands; 3 WIRE FL: Adjacent channel in terminal block will be used for 3rd wire; NON-DIM: Module will act as a switch (necessary for motor loads)
Temperature	32° to 104° F (0° to 40° C)
Humidity	10% to 90% RH (noncondensing)
Heat Dissipation	154 BTU/hr
Height	11.07 in. (281 mm)
Width	7.99 in. (203 mm)
Depth	3.50 in. (89 mm)

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron GLXX-2DIM8 — 8 Kanallı Dimmer Modülü [Teklif Çağrısı]” için yorum yapan ilk kişi siz olun