Crestron SAROS-IC4P-W – Kurulumunuzu Crestron hoparlörlerle tamamlayın. SAROS IC4P-W

Kurulumunuzu Crestron hoparlörlerle tamamlayın. SAROS IC4P-W, Dengeli Mod Radyatör (BMR) dönüştürücüye sahip, geniş kapsama açıları ve basit kurulum sunan bir tavan içi hoparlördür.

Stok kodu: SAROS-IC4P-W Kategoriler:

Kurulumunuzu Crestron hoparlörlerle tamamlayın. SAROS IC4P-W, Dengeli Mod Radyatör (BMR) dönüştürücüye sahip, geniş kapsama açıları ve basit kurulum sunan bir tavan içi hoparlördür.

Teknik Özellikler

Transducer 2.83 in. (72 mm) Balanced Mode Radiator (BMR)
Frequency Response 90 Hz to 30 kHz (±3 dB)
Sensitivity 86 dB @ 1 W/1 m
Coverage 170° conical (speech, up to 4 kHz); 140° conical (music, up to 8 kHz)
BMR Power Handling 25 W
BMR Max Power Output 25 W, connected to an external amplifier via 2-pin audio input; 10 W, connected to the SPEAKER-LEVEL OUTPUT of a SAROS DM‑NAX‑IC4‑A; 6.5 W, connected to the SPEAKER-LEVEL OUTPUT of a SAROS DM‑NAX‑IC4‑A with one other SAROS IC4‑P connected; 4.5 W, connected to the SPEAKER-LEVEL OUTPUT of a SAROS DM‑NAX‑IC4‑A with two other SAROS IC4‑P connected
2-Pin Audio Input (1) 2-pin 5 mm detachable terminal block; Speaker input (alternate); For use with an external amplifier; Impedance: 8 Ohms (7.4 Ohms nominal); Maximum Wire Size: 12 AWG; Do not connect both inputs simultaneously
RJ-45 Audio Input (1) 8-pin RJ-45 connector, female; For use with SAROS DM‑NAX‑IC4A‑W only 1
Power (1) White LED, behavior determined via SAROS DM-NAX-IC4A-W web UI configuration; Solid indicates that the device is paired with a SAROS DM-NAX-IC4A-W; Blinking indicates that the device is in identify mode; Off indicates the device is not paired with a SAROS DM-NAX-IC4A-W or that the LED has been disabled from the SAROS DM-NAX-IC4A-W
Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (noncondensing)
Enclosure Painted steel, plenum-rated; 0.75 in. (19 mm) conduit knockout on top and sides; (1) cable clamp included
Baffle ABS UL® 94V‑0 plastic
Grille Steel with white textured finish; Magnetically held; Safety tether included
Mounting Flush ceiling mount using 4 integral 2-step toggle clamps; 2.36 in. (60 mm) maximum clamping thickness; 6.5 in. (165 mm) recommended cutout diameter; Tile bridge included
Baffle Diameter 7.49 in. (191 mm) not including mounting clamps
Back Can Diameter 6.33 in. (161 mm) not including mounting clamps
Depth 4.28 in. (109 mm) mounting depth; 4.50 in. (115 mm) including grille

Kullanım Alanları

  • Kurumsal ve ticari projelerde in ceiling speakers çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron SAROS-IC4P-W Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Transducer

2.83 in. (72 mm) Balanced Mode Radiator (BMR)

Frequency Response

90 Hz to 30 kHz (±3 dB)

Sensitivity

86 dB @ 1 W/1 m

Coverage

170° conical (speech, up to 4 kHz); 140° conical (music, up to 8 kHz)

BMR Power Handling

25 W

BMR Max Power Output

25 W, connected to an external amplifier via 2-pin audio input; 10 W, connected to the SPEAKER-LEVEL OUTPUT of a SAROS DM‑NAX‑IC4‑A; 6.5 W, connected to the SPEAKER-LEVEL OUTPUT of a SAROS DM‑NAX‑IC4‑A with one other SAROS IC4‑P connected; 4.5 W, connected to the SPEAKER-LEVEL OUTPUT of a SAROS DM‑NAX‑IC4‑A with two other SAROS IC4‑P connected

2-Pin Audio Input

(1) 2-pin 5 mm detachable terminal block; Speaker input (alternate); For use with an external amplifier; Impedance: 8 Ohms (7.4 Ohms nominal); Maximum Wire Size: 12 AWG; Do not connect both inputs simultaneously

RJ-45 Audio Input

(1) 8-pin RJ-45 connector, female; For use with SAROS DM‑NAX‑IC4A‑W only 1

Power

(1) White LED, behavior determined via SAROS DM-NAX-IC4A-W web UI configuration; Solid indicates that the device is paired with a SAROS DM-NAX-IC4A-W; Blinking indicates that the device is in identify mode; Off indicates the device is not paired with a SAROS DM-NAX-IC4A-W or that the LED has been disabled from the SAROS DM-NAX-IC4A-W

Temperature

32° to 104°F (0° to 40°C)

Humidity

10% to 90% RH (noncondensing)

Enclosure

Painted steel, plenum-rated; 0.75 in. (19 mm) conduit knockout on top and sides; (1) cable clamp included

Baffle

ABS UL® 94V‑0 plastic

Grille

Steel with white textured finish; Magnetically held; Safety tether included

Mounting

Flush ceiling mount using 4 integral 2-step toggle clamps; 2.36 in. (60 mm) maximum clamping thickness; 6.5 in. (165 mm) recommended cutout diameter; Tile bridge included

Baffle Diameter

7.49 in. (191 mm) not including mounting clamps

Back Can Diameter

6.33 in. (161 mm) not including mounting clamps

Depth

4.28 in. (109 mm) mounting depth; 4.50 in. (115 mm) including grille

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron SAROS-IC4P-W – Kurulumunuzu Crestron hoparlörlerle tamamlayın. SAROS IC4P-W” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top