Crestron ZUMMESH-JBOX-20A-PLUG — Zum™ J-Box Yük Kontrol Cihazı, Fişli Yük Anahtarı, 20A, 100-240V [Teklif Çağrısı]

Crestron ZUMMESH-JBOX-20A-PLUG — Zum™ J-Box Yük Kontrol Cihazı, Fişli Yük Anahtarı, 20A, 100-240V [Teklif Çağrısı]

Zum™ J-Box Yük Kontrol Cihazı, Fişli Yük Anahtarı, 20A, 100-240V
[Teklif Çağrısı]

Stok kodu: ZUMMESH-JBOX-20A-PLUG Kategoriler:

Zum™ J-Box Yük Kontrol Cihazı, Fişli Yük Anahtarı, 20A, 100-240V
[Teklif Çağrısı]

Öne Çıkan Özellikler

  • Zūm™ kablosuz bağlantı kutusuna monte aydınlatma yükü kontrolörleri
  • Zūm tuş takımları, doluluk sensörleri, boşluk sensörleri ve gün ışığı sensörleriyle kablosuz entegrasyonu eşleştirin ve oynayın
  • Tam bir bağımsız veya ağ bağlantılı Zūm kablosuz aydınlatma kontrol çözümüne entegrasyon için Zūm Mesh eşler arası RF iletişimleri
  • 0-10 V kısılabilir LED veya floresan yüklerin kısma kontrolü
  • 100-277 VAC'de 5 veya 16 A dereceli dimmerler
  • 20 A, 100-277 V yüksek ani aydınlatma yüklerinin sıfır çapraz anahtar kontrolü
  • 20 A, 100-250 V fiş yüklerinin sıfır çapraz anahtar kontrolü
  • Acil durum aydınlatma kontrolü UL® 924 standartlarını karşılar
  • Zūm Ağ Köprüsü veya Zūm Kontak Kapama Çıkışı cihazı için konaklama
  • Uçan kurşun kablo bağlantıları
  • Standart 4 inç kare bağlantı kutusuna nakavt montajı
  • Çevresel hava işleme alanında kurulum için UL 2043 listelenmiştir
  • Enerji yönetimi ekipmanına yönelik UL 916 standardını karşılar
  • CEC Başlık 24 ve ASHRAE® 90.1 enerji verimliliği standartlarını karşılar
  • ICC® Uluslararası Enerji Tasarruf Kodu® uyumlu

Teknik Özellikler

Switched Load Types LED, fluorescent ballast, incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, high-intensity discharge
Load Rating 16 A
Dimmable Load Types 0-10 V LED drivers or fluorescent ballasts (4-wire), 60 mA maximum current sink
Emergency Mode All loads in the zone fully illuminate for ninety minutes or until normal power is restored (whichever comes first); Keypads are disabled; Sensors are disabled; The TEST button toggles the connected load on and off when pressed; Exits emergency mode when normal power is restored or after ninety minutes have passed; System communications return when normal power is restored
Emergency Sequence After normal power is lost, 200 ms (120V) or 750 ms (277V) must pass before the ZUMMESH­-JBOX­-16A-­LV-­EM is powered by an emergency power source.
Line/Load Voltage 100-277 VAC, 50/60 Hz
Line/Load Voltage (-PLUG model only) 125/250 VAC, 50/60 Hz, UL rating per UL 498; 100-250 VAC, 50/60 Hz, operating range
Dim Control Output (-LV models only) 0-10 VDC, 60 mA maximum sink or source
Idle Power Consumption 1 W
RF Transceiver Zūm Mesh & Zūm Net 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant
Zūm Mesh Range 50 ft (15 m) to nearest peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities [1]
Zūm Net Range 50 ft (15 m) to a Zūm Net wireless gateway or nearest Zūm Net mesh network device(s), requires the Zūm Network Bridge (model ZUMMESH-NETBRIDGE, sold separately), range between floors or ceilings is limited to one level, subject to site-specific conditions and individual device capabilities [1]
SETUP (1) Pushbutton and (1) red LED, used for room setup and factory reset
TEST (1) Pushbutton and (1) green LED; Push to toggle the switched load output on and off; Press and hold the button to cycle the dimming level up and down; LED indicates that the load is turned on; LED lights and flashes during room setup and factory reset
Hot (1) 14 AWG Class 1 flying lead; Black, line power input
Neutral (1) 14 AWG Class 1 flying lead; White, neutral
0-10 V Dim +, 0-10 V Dim -, (-LV models only) (2) 18 AWG Class 1 flying lead; Purple, 0-10 VDC dimming control output, positive; Gray, 0-10 VDC dimming control output, negative
Switched Load (1) 14 AWG Class 1 flying lead; Red, switched load output
Expansion Port Accessory port for expansion accessory; ZUMMESH-NETBRIDGE: Provides Zūm Net wireless communications (sold separately); ZUMMESH-CCO: Provides contact closure input (sold separately)
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (noncondensing)
Housing Plastic, white, UL 94 5VA flame rated
Mounting Mounts to the side of a 4-inch square junction box via a 1/2 in. conduit knockout; Meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space; To meet Chicago plenum requirements, install the J-box in a ZUMMESH-JBOX-FMKT-CP enclosure
Height 3.25 in (83 mm)
Width 4.17 in (106 mm); Projects 3.66 in. (93 mm) from the junction box when installed
Depth 1.32 in (34 mm)

Kullanım Alanları

  • Kurumsal ve ticari projelerde load controller çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron ZUMMESH-JBOX-20A-PLUG Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron
Switched Load Types

LED, fluorescent ballast, incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, high-intensity discharge
Load Rating

16 A
Dimmable Load Types

0-10 V LED drivers or fluorescent ballasts (4-wire), 60 mA maximum current sink
Emergency Mode

All loads in the zone fully illuminate for ninety minutes or until normal power is restored (whichever comes first); Keypads are disabled; Sensors are disabled; The TEST button toggles the connected load on and off when pressed; Exits emergency mode when normal power is restored or after ninety minutes have passed; System communications return when normal power is restored
Emergency Sequence

After normal power is lost, 200 ms (120V) or 750 ms (277V) must pass before the ZUMMESH­-JBOX­-16A-­LV-­EM is powered by an emergency power source.
Line/Load Voltage

100-277 VAC, 50/60 Hz
Line/Load Voltage (-PLUG model only)

125/250 VAC, 50/60 Hz, UL rating per UL 498; 100-250 VAC, 50/60 Hz, operating range
Dim Control Output (-LV models only)

0-10 VDC, 60 mA maximum sink or source
Idle Power Consumption

1 W
RF Transceiver

Zūm Mesh & Zūm Net 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant
Zūm Mesh Range

50 ft (15 m) to nearest peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities [1]
Zūm Net Range

50 ft (15 m) to a Zūm Net wireless gateway or nearest Zūm Net mesh network device(s), requires the Zūm Network Bridge (model ZUMMESH-NETBRIDGE, sold separately), range between floors or ceilings is limited to one level, subject to site-specific conditions and individual device capabilities [1]
SETUP

(1) Pushbutton and (1) red LED, used for room setup and factory reset
TEST

(1) Pushbutton and (1) green LED; Push to toggle the switched load output on and off; Press and hold the button to cycle the dimming level up and down; LED indicates that the load is turned on; LED lights and flashes during room setup and factory reset
Hot

(1) 14 AWG Class 1 flying lead; Black, line power input
Neutral

(1) 14 AWG Class 1 flying lead; White, neutral
0-10 V Dim +, 0-10 V Dim -, (-LV models only)

(2) 18 AWG Class 1 flying lead; Purple, 0-10 VDC dimming control output, positive; Gray, 0-10 VDC dimming control output, negative
Switched Load

(1) 14 AWG Class 1 flying lead; Red, switched load output
Expansion Port

Accessory port for expansion accessory; ZUMMESH-NETBRIDGE: Provides Zūm Net wireless communications (sold separately); ZUMMESH-CCO: Provides contact closure input (sold separately)
Temperature

32° to 104° F (0° to 40° C)
Humidity

10% to 90% RH (noncondensing)
Housing

Plastic, white, UL 94 5VA flame rated
Mounting

Mounts to the side of a 4-inch square junction box via a 1/2 in. conduit knockout; Meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space; To meet Chicago plenum requirements, install the J-box in a ZUMMESH-JBOX-FMKT-CP enclosure
Height

3.25 in (83 mm)
Width

4.17 in (106 mm); Projects 3.66 in. (93 mm) from the junction box when installed
Depth

1.32 in (34 mm)

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron ZUMMESH-JBOX-20A-PLUG — Zum™ J-Box Yük Kontrol Cihazı, Fişli Yük Anahtarı, 20A, 100-240V [Teklif Çağrısı]” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

İlgili ürünler

Scroll to Top