Crestron HD-RX-4K-210-C-E — DMPS Essentials 4K Çok Formatlı 2×1 AV Anahtarı ve Alıcı

TXU modelleri hariç tüm DM® Essentials vericileriyle uyumludur. Bir DM Essentials girişi, bir HDMI® girişi, bir ölçeklendirme HDMI çıkışı ve bir analog ses çıkışı içerir. Ayrıca IR, RS-232, röle, G/Ç ve Ethernet kontrol bağlantı noktalarını içerir. .AV Framework™ teknolojisini destekler.

Stok kodu: HD-RX-4K-210-C-E Kategoriler:

TXU modelleri hariç tüm DM® Essentials vericileriyle uyumludur. Bir DM Essentials girişi, bir HDMI® girişi, bir ölçeklendirme HDMI çıkışı ve bir analog ses çıkışı içerir. Ayrıca IR, RS-232, röle, G/Ç ve Ethernet kontrol bağlantı noktalarını içerir. .AV Framework™ teknolojisini destekler.

Öne Çıkan Özellikler

  • 4K60 4:2:0 özelliği
  • Bir DM Essentials vericiyle birlikte çalışabilirlik için bir DM® Essentials bağlantı noktası
  • Bir HDMI® girişi
  • 4K ölçekleyicili bir HDMI çıkışı
  • Gigabit Ethernet bağlantı noktası
  • Stereo hat düzeyinde ses çıkışı
  • IR, RS-232, röle ve G/Ç kontrol bağlantı noktaları
  • CEC (Tüketici Elektroniği Kontrolü) yeteneği
  • Girişlerin otomatik olarak değiştirilmesi
  • EDID yönetimi
  • HDCP 2.2 desteği dahil HDCP yönetimi
  • Kolay yapılandırma ve izleme için yerleşik web arayüzü
  • Crestron® 3-Series® veya sonraki kontrol sistemleriyle uyumluluk
  • .AV Framework™ teknolojisi desteği
  • XiO Cloud® hizmet desteği

Teknik Özellikler

Switcher 2×1 auto-switching or manual, audio-follows-video, Crestron Auto-Locking® and QuickSwitch HD™ technologies
Scaler (HDMI Output) 4K video scaler with intelligent frame rate conversion, Deep Color support, content-adaptive noise reduction, 3:2/2:2 pull-down detection and recovery
Input Signal Types HDMI (Dual-Mode DisplayPort compatible 2 ), DM Essentials
Output Signal Types HDMI, stereo analog
Copy Protection HDCP 2.2
Maximum Resolutions Common resolutions are listed below for the HDMI and DM Essentials inputs.
Digital Formats 2-channel LPCM
Analog Formats Stereo 2-channel
Digital-to-Analog Conversion 24-bit 48 kHz
Output Impedance 200 Ω balanced; 100 Ω unbalanced
Maximum Output Level 4Vrms balanced; 2Vrms unbalanced
Output Volume -80 to +20 dB level adjustment range plus Mute
Mute Enable or disable independently for HDMI and analog audio output
Analog Output Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB S/N Ratio: >95 dB @ 10 dBV, 20 Hz to 20 kHz, A-weighted THD+N: <0.005% @ 1 kHz and 10 dBV Stereo Separation: 20 Hz to 20 kHz ≤80 dB
Ethernet (2) LEDs on RJ-45 connector; Green indicates that an Ethernet link is established; Flashing amber indicates Ethernet activity
RS-232 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
IR (1) 2-pin 3.5 mm detachable terminal block; IR output control port; supports IR up to 60 kHz; IRP2 emitter sold separately NOTE: The IR port provides Power On/Off control of the display device with the use of a control system.
HDMI HDCP 2.2, EDID, CEC
DM Essentials (2) LEDs on RJ-45 connector; Green indicates that a DM Essentials link is established; Flashing amber indicates non-HDCP video and solid amber indicates HDCP video
HDMI INPUT 1 (1) HDMI Type A connector, female; HDMI digital video/audio inputs; DVI and Dual-Mode DisplayPort interface compatible 2
DM INPUT 2 (1) 8-pin RJ-45 yellow connector, female, shielded; DM Essentials input port for connection to a DM Essentials transmitter
HDMI OUTPUT (1) HDMI Type A connector, female; HDMI digital video/audio output; DVI compatible 3 NOTE: CEC over the HDMI output provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.
AUDIO L/R (1) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Maximum Output Level: 4Vrms balanced, 2Vrms unbalanced; Output Impedance: 200 Ω balanced, 100 Ω unbalanced
I/O 1-2 (2) 2-pin detachable terminal blocks; Comprised of 2 Versiport digital input/output or analog input ports (referenced to GND); Digital Input: Rated to 0-24VDC, input impedance 20 kΩ, logic threshold >3.125V low/0 and <1.875 V high/1; Digital Output: 250mA sink from maximum 24VDC, catch diodes for use with real world loads; Analog Input: Rated for 0-10VDC, protected to 24VDC maximum, input impedance 21 kΩ with pull-up resistor disabled; Programmable 5V, 2 kΩ pull-up resistor per pin
RELAY 1-2 (2) 2-pin detachable terminal blocks; Comprised of 2 normally open, isolated relays; Rated 1A, 30VAC/VDC; MOV arc suppression across contacts
COM (1) 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Supports RS-232 up to 115.2k baud with hardware and software handshaking NOTE: The COM port provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.
24V 1.25A (1) 2.1 x 5.5 mm DC power connector; 24VDC power input; PW-2412WU power pack included NOTE: The power pack powers both the HD‑RX‑4K-210-C-E and the connected DM Essentials transmitter. A power pack must not be connected to both devices simultaneously.
SERVICE (1) USB Type A connector, female; For factory use only
PWR (1) bicolor green/amber LED, indicates that power is being applied to the HD‑RX‑4K-210-C-E from the power pack connected to either the HD‑RX‑4K-210-C-E or the transmitter; Amber indicates that the HD‑RX‑4K-210-C-E is booting; Green indicates that the HD‑RX‑4K-210-C-E is operational
INPUT 1-2 (2) Push buttons for manual input selection and (2) bicolor green/amber LEDs; Green indicates that video is switched; Amber indicates that video is detected but is not switched
AUTO (1) Push button to enable or disable automatic switching, and (1) green LED to indicate that automatic switching is enabled
SETUP (1) Red LED and (1) push button for display of IP address on the HDMI output
Power Pack (Included) Input: 100-240 VAC, 50/60 Hz Output: 1.25 A @ 24 VDC Model: PW-2412WU NOTE: The power pack powers both the HD‑RX‑4K-210-C-E and the connected DM Essentials transmitter. A power pack must not be connected to both devices simultaneously.
Power Consumption 9 W typical
Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (noncondensing)
Heat Dissipation 30.7 BTU/hr
Acoustic Noise Not applicable (fanless)
Chassis Metal, black finish, vented sides, 2 mounted flanges attached
Mounting Surface or rack rail mount
Height 5.11 in. (130 mm)
Width 10.53 in. (268 mm) with mounting flanges attached
Depth 1.10 in. (28 mm)

Kullanım Alanları

  • Kurumsal ve ticari projelerde receiver w switching çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron HD-RX-4K-210-C-E Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Switcher

2×1 auto-switching or manual, audio-follows-video, Crestron Auto-Locking® and QuickSwitch HD™ technologies

Scaler (HDMI Output)

4K video scaler with intelligent frame rate conversion, Deep Color support, content-adaptive noise reduction, 3:2/2:2 pull-down detection and recovery

Input Signal Types

HDMI (Dual-Mode DisplayPort compatible 2 ), DM Essentials

Output Signal Types

HDMI, stereo analog

Copy Protection

HDCP 2.2

Maximum Resolutions

Common resolutions are listed below for the HDMI and DM Essentials inputs.

Digital Formats

2-channel LPCM

Analog Formats

Stereo 2-channel

Digital-to-Analog Conversion

24-bit 48 kHz

Output Impedance

200 Ω balanced; 100 Ω unbalanced

Maximum Output Level

4Vrms balanced; 2Vrms unbalanced

Output Volume

-80 to +20 dB level adjustment range plus Mute

Mute

Enable or disable independently for HDMI and analog audio output

Analog Output Performance

Frequency Response: 20 Hz to 20 kHz ±0.5 dB S/N Ratio: >95 dB @ 10 dBV, 20 Hz to 20 kHz, A-weighted THD+N: <0.005% @ 1 kHz and 10 dBV Stereo Separation: 20 Hz to 20 kHz ≤80 dB

Ethernet

(2) LEDs on RJ-45 connector; Green indicates that an Ethernet link is established; Flashing amber indicates Ethernet activity

RS-232

2-way device control and monitoring up to 115.2k baud with hardware and software handshaking

IR

(1) 2-pin 3.5 mm detachable terminal block; IR output control port; supports IR up to 60 kHz; IRP2 emitter sold separately NOTE: The IR port provides Power On/Off control of the display device with the use of a control system.

HDMI

HDCP 2.2, EDID, CEC

DM Essentials

(2) LEDs on RJ-45 connector; Green indicates that a DM Essentials link is established; Flashing amber indicates non-HDCP video and solid amber indicates HDCP video

HDMI INPUT 1

(1) HDMI Type A connector, female; HDMI digital video/audio inputs; DVI and Dual-Mode DisplayPort interface compatible 2

DM INPUT 2

(1) 8-pin RJ-45 yellow connector, female, shielded; DM Essentials input port for connection to a DM Essentials transmitter

HDMI OUTPUT

(1) HDMI Type A connector, female; HDMI digital video/audio output; DVI compatible 3 NOTE: CEC over the HDMI output provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.

AUDIO L/R

(1) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Maximum Output Level: 4Vrms balanced, 2Vrms unbalanced; Output Impedance: 200 Ω balanced, 100 Ω unbalanced

I/O 1-2

(2) 2-pin detachable terminal blocks; Comprised of 2 Versiport digital input/output or analog input ports (referenced to GND); Digital Input: Rated to 0-24VDC, input impedance 20 kΩ, logic threshold >3.125V low/0 and <1.875 V high/1; Digital Output: 250mA sink from maximum 24VDC, catch diodes for use with real world loads; Analog Input: Rated for 0-10VDC, protected to 24VDC maximum, input impedance 21 kΩ with pull-up resistor disabled; Programmable 5V, 2 kΩ pull-up resistor per pin

RELAY 1-2

(2) 2-pin detachable terminal blocks; Comprised of 2 normally open, isolated relays; Rated 1A, 30VAC/VDC; MOV arc suppression across contacts

COM

(1) 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Supports RS-232 up to 115.2k baud with hardware and software handshaking NOTE: The COM port provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.

24V 1.25A

(1) 2.1 x 5.5 mm DC power connector; 24VDC power input; PW-2412WU power pack included NOTE: The power pack powers both the HD‑RX‑4K-210-C-E and the connected DM Essentials transmitter. A power pack must not be connected to both devices simultaneously.

SERVICE

(1) USB Type A connector, female; For factory use only

PWR

(1) bicolor green/amber LED, indicates that power is being applied to the HD‑RX‑4K-210-C-E from the power pack connected to either the HD‑RX‑4K-210-C-E or the transmitter; Amber indicates that the HD‑RX‑4K-210-C-E is booting; Green indicates that the HD‑RX‑4K-210-C-E is operational

INPUT 1-2

(2) Push buttons for manual input selection and (2) bicolor green/amber LEDs; Green indicates that video is switched; Amber indicates that video is detected but is not switched

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron HD-RX-4K-210-C-E — DMPS Essentials 4K Çok Formatlı 2×1 AV Anahtarı ve Alıcı” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top