Crestron HD-DA2-4KZ-E – Bir HDMI® kaynağını iki ayrı çıkışa böler. Yüksek bit hızlı

Bir HDMI® kaynağını iki ayrı çıkışa böler. Yüksek bit hızlı 7.1 ses ile 4K60 4:4:4 ve HDR video sinyallerini destekler.

Stok kodu: HD-DA2-4KZ-E Kategoriler:

Bir HDMI® kaynağını iki ayrı çıkışa böler. Yüksek bit hızlı 7.1 ses ile 4K60 4:4:4 ve HDR video sinyallerini destekler.

Teknik Özellikler

Input Signal Type HDMI (Dual-Mode DisplayPort compatible [2] )
Output Signal Type HDMI
Copy Protection Selectable for HDCP 2.2, HDCP 1.4, or HDCP disabled
Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels
USB USB 2.0 host; supports firmware update and custom EDID upload via a USB flash drive
HDMI HDCP & EDID (does not pass CEC)
HDCP Version Selectable for HDCP 2.2, 1.4, or OFF; HDCP encrypted content is blanked in OFF mode
EDID Mode Selectable for DEFAULT or COPY 1ST; • The factory default EDID is 4K60 4:4:4 non-HDR video with 2-channel LPCM audio; • The factory default EDID can be replaced with a custom EDID via USB; • Sliding the switch from DEFAULT to COPY 1ST copies and stores the EDID from the device at OUTPUT 1 and passes it to the INPUT source device; • Sliding the switch from COPY 1ST to DEFAULT erases the stored EDID and uses the factory default or custom EDID; Note: Changing the device at OUTPUT 1 will not update the stored EDID until the switch is moved to DEFAULT and back to COPY 1ST
INPUT (1) Green LED, indicates video signal presence at the HDMI input
OUTPUT 1 – 2 (2) Green LEDs, each indicates video signal transmission at the corresponding HDMI output
SERVICE (1) USB Type A connector, female; USB 2.0 host port; For firmware update and custom EDID upload via a USB flash drive
24VDC 0.75A (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2407WU power pack included
PWR (1) Bi-color LED, indicates operating power is supplied via the power pack; illuminates amber while booting, green when operating
SETUP (1) Pushbutton and (1) red LED, restores factory settings
RESET (1) Recessed pushbutton for hardware reset
HDCP (1) 3-position slide switch, selects the HDCP version (OFF, 1.4, or 2.2)
EDID (1) 2-position slide switch, selects the EDID mode (DEFAUT or COPY 1ST)
Power Pack (included) Input: 100-240 Volts AC, 50/60 Hz; Output: 0.75 Amps @ 24 Volts DC; Model: PW-2407WU
Power Consumption 4.3 W (typical)
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Chassis Metal, black finish, with (2) integral mounting flanges
Mounting Freestanding, surface mount, or attach to a single rack rail
Height 0.87 in (22 mm)
Width 5.73 in (146 mm)
Depth 4.67 in (119 mm)

Kullanım Alanları

  • Kurumsal ve ticari projelerde hdmi distribution amplifiers çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron HD-DA2-4KZ-E Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Input Signal Type

HDMI (Dual-Mode DisplayPort compatible [2] )

Output Signal Type

HDMI

Copy Protection

Selectable for HDCP 2.2, HDCP 1.4, or HDCP disabled

Formats

Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels

USB

USB 2.0 host; supports firmware update and custom EDID upload via a USB flash drive

HDMI

HDCP & EDID (does not pass CEC)

HDCP Version

Selectable for HDCP 2.2, 1.4, or OFF; HDCP encrypted content is blanked in OFF mode

EDID Mode

Selectable for DEFAULT or COPY 1ST; • The factory default EDID is 4K60 4:4:4 non-HDR video with 2-channel LPCM audio; • The factory default EDID can be replaced with a custom EDID via USB; • Sliding the switch from DEFAULT to COPY 1ST copies and stores the EDID from the device at OUTPUT 1 and passes it to the INPUT source device; • Sliding the switch from COPY 1ST to DEFAULT erases the stored EDID and uses the factory default or custom EDID; Note: Changing the device at OUTPUT 1 will not update the stored EDID until the switch is moved to DEFAULT and back to COPY 1ST

INPUT

(1) Green LED, indicates video signal presence at the HDMI input

OUTPUT 1 – 2

(2) Green LEDs, each indicates video signal transmission at the corresponding HDMI output

SERVICE

(1) USB Type A connector, female; USB 2.0 host port; For firmware update and custom EDID upload via a USB flash drive

24VDC 0.75A

(1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2407WU power pack included

PWR

(1) Bi-color LED, indicates operating power is supplied via the power pack; illuminates amber while booting, green when operating

SETUP

(1) Pushbutton and (1) red LED, restores factory settings

RESET

(1) Recessed pushbutton for hardware reset

HDCP

(1) 3-position slide switch, selects the HDCP version (OFF, 1.4, or 2.2)

EDID

(1) 2-position slide switch, selects the EDID mode (DEFAUT or COPY 1ST)

Power Pack (included)

Input: 100-240 Volts AC, 50/60 Hz; Output: 0.75 Amps @ 24 Volts DC; Model: PW-2407WU

Power Consumption

4.3 W (typical)

Temperature

32° to 104° F (0° to 40° C)

Humidity

10% to 90% RH (non-condensing)

Chassis

Metal, black finish, with (2) integral mounting flanges

Mounting

Freestanding, surface mount, or attach to a single rack rail

Height

0.87 in (22 mm)

Width

5.73 in (146 mm)

Depth

4.67 in (119 mm)

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron HD-DA2-4KZ-E – Bir HDMI® kaynağını iki ayrı çıkışa böler. Yüksek bit hızlı” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top