3-Series® 4K DigitalMedia™ Sunum Sistemi 350
Öne Çıkan Özellikler
- 9×4 AV değiştirici
- 4K ve Ultra HD video desteği
- .AV Çerçeve™ teknolojisi
- Dahili AirMedia® ağ geçidi (lisans gereklidir)
- H.264 akışlı video kod çözücü
- 4K/60 video ölçeklendirme
- HDBaseT® standardıyla uyumlu DigitalMedia 8G+® teknolojisi
- 6 kanallı mikrofon mikseri
- Ses dijital sinyal işleme (DSP)
- Dahili amplifikatör, 25 W/Ch @ 8 Ω stereo veya 50 W @ 70/100V mono
- Analogdan HDMI'ya ses yerleştirme ve ayırma
- EDID formatı yönetimi
- QuickSwitch HD™ teknolojisi
- Otomatik Kilitleme® teknolojisi
- USB sinyal yönlendirme
Teknik Özellikler
| SDRAM | 512 MB |
|---|---|
| Flash | 4 GB |
| Ethernet | 100/1000 Mbps, auto‑switching, auto‑negotiating, autodiscovery, full/half duplex, industry‑standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140‑2 compliant encryption, IEEE 802.1X, SNMP, BACnet™ connectivity and IP 10 , IPv4 or IPv6, Active Directory® authentication, IIS v.6.0 Web Server, SMTP e‑mail client, RSTP, Private Network Mode |
| Control Subnet | 100/1000 Mbps Ethernet, auto‑switching, autonegotiating, auto‑discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode, IEEE 802.3at Type 1 compliant PoE PSE |
| AirMedia 1 | (Via Ethernet) 100 Mbps, IPv4, DHCP, TLS, AES, mDNS, HTTPS web server |
| Streaming | (Via Ethernet) 100 Mbps, DHCP, H.264 decoding, MJPEG decoding, HDCP 2.2, RTP, RTSP, SDP |
| Cresnet | Cresnet master mode |
| USB | USB signal routing via select DM transmitters and receivers, or via USB‑EXT‑DM series extenders 9 ; USB device port for computer console (setup) |
| RS‑232 | 2‑way device control and monitoring up to 115.2k baud with hardware and software handshaking |
| IR/Serial | 1‑way device control via infrared up to 1.2 MHz or serial TTL/ RS‑232 (0‑5V) up to 115.2k baud |
| DigitalMedia | DM 8G+, HDCP 2.2, EDID, CEC, PoDM+ 8 , Ethernet |
| HDBaseT | HDCP 2.2, EDID, CEC, RS‑232, PoE+ 8 , Ethernet |
| HDMI® | HDCP 2.2, EDID, CEC |
| Switcher | 9×4 matrix, Crestron QuickSwitch HD technology |
| Scalers (HDMI outputs) | (2) 4K video scalers with motion‑adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion 6 , content‑adaptive noise reduction, and widescreen format selection (zoom, stretch, maintain aspect‑ratio, or 1:1) |
| Input Signal Types | HDMI (Dual‑Mode DisplayPort compatible 5 ) on Inputs 1‑6; DM 8G+ & HDBaseT on Inputs 7 & 8; Streaming & AirMedia on Input 9 (LAN); Analog 2‑channel on Aud In 1‑5 |
| Output Signal Types | HDMI (DVI compatible 5 ) on Outputs 1 & 2; DM 8G+ & HDBaseT on Outputs 3 & 4 |
| Video Formats | H.264 (MPEG‑4 part 10 AVC), MJPEG |
| Audio Format | Stereo |
| Bitrates | Up to 25 Mbps |
| Resolutions | 800×600@60 Hz, 1024×768@60 Hz, 1280×720@60 Hz, 1280×768@60 Hz, 1280×800@60 Hz, 1280×1024@60 Hz, 1360×768@60 Hz, 1400×1050@60 Hz, 1440×900@60 Hz, 1600×1200@60 Hz, 1920×1080@60 Hz, 1920×1200@60 Hz |
| Users | Supports up to 32 users (presentation device connections) |
| Client Software OS Support | Windows 7, Windows 8, Windows 10, Mac® OS X® (versions 10.10 through 10.13) |
| Client Software Video Frame Rate | 30 fps |
| Mobile App OS Support | Apple® iOS®, Android |
| Full Screen Device Mirroring | Shares the screen image and audio from an Apple iOS, Android, Mac OS X, or Windows device |
| Switcher/Mixer | 14×5 stereo source matrix switcher, digital & analog source inputs, streaming & AirMedia source input, 6‑channel gated mic mixer w/DSP, independent mixer per analog output (6‑ch mic + 1 stereo source), independent stereo DSP per analog output, integrated power amplifier, two independent digital output mixers (6‑ch mic + 1 stereo source), 2×1 digital output mix selector per digital output |
| Analog‑To‑Digital Conversion | 24‑bit 48 kHz |
| Digital‑To‑Analog Conversion | 24‑bit 48 kHz |
| Frequency Response, Digital & Analog Line Outputs | 20 Hz to 20 kHz ±0.5 dB (digital source); 20 Hz to 20 kHz ±0.5 dB (analog line source); 20 Hz to 20 kHz ±0.7 dB (microphone source) |
| Frequency Response, Speaker Output | 20 Hz to 20 kHz ±1 dB @ 25 W into 8 Ω; 100 Hz to 20 kHz ±2.5 dB @ 70 or 100V |
| S/N Ratio, Digital & Analog Line Outputs | >108 dB, 1 kHz, A‑weighted (digital source); >103 dB, 1 kHz, A‑weighted (analog line source) |
| S/N Ratio, Speaker Output | 98 dB @ 25 W into 8 Ω, 1 kHz, A‑weighted; 96 dB @ 25 W into 4 Ω, 1 kHz, A‑weighted |
| THD+N, Digital & Analog Line Outputs | <0.002%, 20 Hz to 20 kHz (digital source); <0.005%, 20 Hz to 20 kHz (analog line source); <0.05%, 20 Hz to 20 kHz (microphone source) |
| THD+N, Speaker Output | <0.1%, 1 kHz @ 25 W into 4 or 8 Ω; <0.7%, 20 Hz to 20 kHz @ 25 W into 4 or 8 Ω |
| Stereo Separation, Digital & Analog Line Outputs | >108 dB (digital source); >103 dB (analog source) |
| Stereo Separation, Speaker Output | >65 dB @ 25 W, 1 kHz |
| Channel Separation, Digital Outputs | >108 dB (digital source); >103 dB (analog source) |
| Channel Separation, Analog Line Outputs | >103 dB |
| Speaker Output Modes | 4 Ω/8 Ω stereo, 70V mono, or 100V mono |
| Speaker Amplifier Output Power | 25 W RMS per channel @ 4 or 8 Ω; 50 W RMS @ 70 or 100V |
| Phantom Power | Enable/Disable per channel |
| Gain | 0 to +60 dB gain adjustment in 3 dB increments, plus mute |
| Delay | 0.0 to 85.0 ms |
| EQ Center Frequencies | 50 to 200 Hz (Band 1), 200 to 800 Hz (Band 2), 800 to 3.2k Hz (Band 3), 3.2k to 12.8k Hz (Band 4) |
| EQ Gain | ±12.0 dB per band |
| High‑Pass Filter | On or Off |
| Gating Threshold | ‑80 to 0 dB |
| Gating Depth (Attenuation) | ‑80 to 0 dB |
| Gating Attack | 1 to 250 ms |
| Gating Release | 1 to 1000 ms |
| Compression Threshold | ‑80 to 0 dB |
| Compression Ratio | 1:1 to 10:1 |
| Compression Attack | 1 to 250 ms |
| Compression Release | 1 to 1000 ms |
| Compression Curve | Hard or soft knee |
| Analog Formats | Stereo 2‑channel |
| Digital Formats | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels |
| Input Compensation | ±10.0 dB, adjustable per input |
| Output Signal Format | Stereo |
| Mic 1 – 6 | ‑80 to +10 dB level adjustment range, plus mute and pan |
| Mic Master | ‑80 to +10 dB level adjustment range, plus mute |
| Source | ‑80 to +10 dB level adjustment range, plus mute and balance |
| Master Volume | ‑80 to +10 dB level adjustment range, plus mute |
| Mixer Presets | 1 through 5 |
| Bass | ±12.0 dB |
| Treble | ±12.0 dB |
| Equalization | 10‑band graphic + 4‑band parametric |
| GEQ Center Frequencies | 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, and 16k Hz |
| GEQ Gain | ±12.0 dB per band |
| PEQ Center Frequencies | 10 to 22000 Hz per band |
| PEQ Gain | ‑36.0 to +24.0 dB per band |
| PEQ Bandwidth | 0.02 to 3.50 octaves per band |
| PEQ Types | Parametric, High Pass, Low Pass, High Shelf, Low Shelf, Notch |
| Limiter Threshold | ‑80 to 0 dB |
| Limiter Ratio | 1:1 to 10:1 |
| Limiter Attack | 1 to 250 ms |
| Limiter Hold | 1 to 200 ms |
| Limiter Release | 1 to 1000 ms |
| Limiter Curve | Hard or soft knee |
| EQ Presets | 1 through 10 (includes Delay and Limiter settings) |
| Formats | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels |
| Digital Output Mix Select 1 – 2 | Selects which mix is routed to the corresponding output |
| AUD IN 1 – 5 | (5) 5‑pin 3.5 mm detachable terminal blocks Balanced/unbalanced stereo line‑level analog audio inputs; Input Impedance: 24 kΩ balanced/unbalanced; Maximum Input Level: 4Vrms balanced, 2Vrms unbalanced |
| MC1/LN1 – MC6/LN6 | (6) 5‑pin 3.5 mm detachable terminal blocks; Comprises (6) balanced microphone/line audio inputs; Mic Input Level: ‑60 to 0 dBV, 1Vrms maximum; Balanced Line Input Level: ‑31 to +11 dBV, 3.7Vrms maximum; Unbalanced Line Input Level: ‑37 to +5 dBV, 1.85Vrms maximum; Mic Input Impedance: 3.9 kΩ balanced; Line Input Impedance: 19 kΩ balanced, 9.5 kΩ unbalanced; Phantom Power: +48VDC, software enabled/disabled per channel |
| HDMI 1 – 6 INPUTS | (6) HDMI Type A connectors, female; Digital video/audio inputs; (DVI and Dual‑Mode DisplayPort compatible 5 ) |
| DM INPUT 7 – 8 | (2) 8‑pin RJ45 connectors, female, shielded; DM 8G+ inputs, HDBaseT compliant; PoDM+ PSE ports (HDBaseT PoE+ compatible) 8 ; Each connects to the DM 8G+ output of a DM transmitter or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM‑CBL‑8G, or Crestron DM‑CBL‑ULTRA cable 7 |
| SPEAKER OUTPUT 4Ω/8Ω L – R | (2) 2‑pin 7.62 mm 15A detachable terminal blocks; 4‑8 Ω stereo speaker‑level audio output; Wire Size: Terminals accept up to 14 AWG (2.5 mm²); Output Power: 25 W RMS per channel stereo at 4 or 8 Ω |
| SPEAKER OUTPUT 70/100V | (1) 2‑pin 7.62 mm 15A detachable terminal block; Transformer‑isolated 70 or 100V mono speaker‑level audio output; Wire Size: Terminals accept up to 14 AWG (2.5 mm²); Output Power: 50 W RMS mono at 70 or 100V NOTE: The 4Ω/8 Ω and 70/100V outputs are mutually exclusive |
| PROG OUT | (1) 5‑pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line‑level audio output; Output Impedance: 200 Ω balanced, 100 Ω unbalanced; Maximum Output Level: 4Vrms balanced, 2Vrms unbalanced |
| AUX OUT 1 – 2 | (2) 5‑pin 3.5 mm detachable terminal blocks; Balanced/unbalanced stereo line‑level audio outputs; Output Impedance: 200 Ω balanced, 100 Ω unbalanced; Maximum Output Level: 4Vrms balanced, 2Vrms unbalanced |
| HDMI 1 – 2 OUTPUTS | (2) HDMI Type A connectors, female; Digital video/audio outputs; (DVI compatible 5 ) |
| DM OUTPUT 3 – 4 | (2) 8‑pin RJ45 connectors, female, shielded; DM 8G+ outputs, HDBaseT compliant; PoDM+ PSE ports (HDBaseT PoE+ compatible) 8 ; Each connects to the DM 8G+ input of a DM receiver or other DM device, or to an HDBaseT device, via CAT5e, DM‑CBL‑8G or DM‑CBL‑ULTRA cable 7 (sold separately) |
| IR/SERIAL OUT 1 – 4 | (4) 2‑pin 3.5 mm detachable terminal blocks; IR/Serial output ports; IR output up to 1.2 MHz; 1‑way serial TTL/RS‑232 (0‑5V) up to 115.2k baud |
| IR IN | (1) 3‑pin 3.5 mm detachable terminal block; Allows control from IR wireless remotes using RC‑5 command set |
| INPUT 1 – 4 | (1) 5‑pin 3.5 mm detachable terminal block; Comprises (4) programmable digital inputs; Input Voltage Range: 0 to 24VDC, referenced to GND; Logic Threshold: 2.5VDC nominal with 1V hysteresis band; Input Impedance: 10 kΩ at >5V, 1 MΩ at <5V; Pull‑up Resistor: 2.2 kΩ per input |
| RELAY 1 – 4 | (1) 8‑pin 3.5 mm detachable terminal block; Comprises (4) normally open, isolated relays; Rated 1A, 30VAC/VDC; MOV arc suppression across contacts |
| COM A – B | (2) DB9 connectors, male; Bidirectional RS‑232 ports; Up to 115.2k baud, hardware and software handshaking support |
| NET | (1) Yellow LED, indicates Cresnet bus activity |
| PoDM+ INPUT PWR | (1) Combo D‑Sub 7w2 connector, male; 48VDC power input for PoDM power supply 8 ; Enables PoDM+ power sourcing on each DM INPUT/OUTPUT port; Enables PoE power sourcing on the CONTROL SUBNET port |
| SERVICE | (1) USB Type B connector, female; For factory use only |
| 100‑240V~ 6.0A 50/60Hz | (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included |
| G | (1) 6‑32 screw; Chassis ground lug |
| CONTENT LAN IN 9 | (1) 8‑pin RJ45 connector, female; 10Base‑T/100Base‑TX Ethernet port; Provides a dedicated LAN connection for streaming input & AirMedia 1 |
| CONTROL SUBNET | (1) 8‑pin RJ45 connector, female; 10Base‑T/100Base‑TX/1000Base‑T Ethernet port; PoE PSE (Power Sourcing Equipment) port 8 ; Provides a dedicated local network for Crestron devices |
| LAN | (1) Yellow LED, indicates Ethernet activity |
| COMPUTER (front) | (1) USB Type B connector, female; USB computer console port (for setup only) |
| PWR | (1) Green LED, indicates operating power supplied from AC power line |
| HW‑R | (1) Recessed pushbutton for hardware reset, reboots the control system |
| SW‑R | (1) Recessed pushbutton for software reset, restarts the software program |
| LCD Display | (1) Green LCD alphanumeric; adjustable backlight; 2 lines x 20 characters per line; displays input/outputs by name, volume levels, setup menus, signal routing, device info, and other system information |
| SOFTKEYS | (4) Pushbuttons for activation of LCD driven functions and passcode entry |
| MENU | (1) Pushbutton, steps menu back one level |
| Λ, V | (2) Pushbuttons, for scrolling up or down through the menu and adjusting menu parameters |
| ENTER | (1) Pushbutton, executes the highlighted menu or value |
| VOLUME | (1) Continuous turn rotary encoder, adjusts menu parameters; Defaults to Program audio volume control |
| MUTE | (1) Pushbutton and red LED, mutes the Program audio output |
| INFO | (1) Pushbutton and red LED; Selects INFO mode to view AV and device info |
| ROUTE | (1) Pushbutton and red LED; Selects ROUTE mode to allow routing changes |
| VIEW | (1) Pushbutton and red LED; Selects VIEW mode to view current routing |
| INPUT 1 – 9 | (9) Pushbuttons and red LEDs; Selects the corresponding video input for routing |
| OUTPUT 1 – 4, PROG, AUX 1 – 2 | (7) Pushbuttons and red LEDs; Selects the corresponding video or audio output for routing |
| SPEAKER OUTPUT (rear) | (1) 3‑position slide switch; Selects amplifier output configuration |
| DM INPUT 7 – 8 (rear) | (4) LEDs, (2) green and (2) amber; Green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence for each corresponding port |
| DM OUTPUT 3 – 4 (rear) | (4) LEDs, (2) green and (2) amber; Green LEDs indicate DM link status, amber LEDs indicate video and HDCP signal presence for each corresponding port |
| CONTENT LAN IN 9 (rear) | (2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status |
| CONTROL SUBNET (rear) | (2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status |
| LAN (rear) | (2) LEDs, (1) green and (1) amber, for indication of Ethernet speed, activity, and link status |
| Main Power | 6A @ 100‑240VAC, 50/60 Hz |
| Power Consumption | 93 W typical; 72 W idle |
| Available Cresnet Power | 10 W |
| Power over DM (PoDM) | IEEE 802.3at compliant PoDM+ PSE (Power Sourcing Equipment), each DM INPUT/OUTPUT port supplies up to 30 W to power one PoDM (Class 0‑3) or PoDM+ (Class 4) PD (Powered Device) 8 |
| Power over HDBaseT | IEEE 802.3at PoE+ compliant PSE, each DM INPUT/OUTPUT port supplies up to 30 W to power one HDBaseT PoE or PoE+ PD 8 |
| Power over Ethernet (PoE) | IEEE 802.3at compliant PoE PSE (Power Sourcing Equipment), the CONTROL SUBNET port supplies up to 15.4 W to power one PoE (Class 0‑3) PD (Powered Device) 8 |
| PoDM Power Supply | Compatible with model PW‑5430DUS (sold separately) |
| Temperature | 41° to 104° F (5° to 40° C) |
| Humidity | 10% to 90% RH (non‑condensing) |
| Heat Dissipation | 317 BTU/hr typical; 246 BTU/hr idle |
| Chassis | Metal, fan‑cooled, vented sides |
| Front Panel | Metal, black finish with polycarbonate label overlay |
| Mounting | Freestanding or 3 RU 19 in. rack‑mountable (adhesive feet and rack ears included) |
| Height | 5.20 in. (133 mm) without feet |
| Width | 17.28 in. (439 mm); 19.00 in. (483 mm) with rack ears |
| Depth | 15.75 in. (400 mm) |
Kullanım Alanları
- Kurumsal ve ticari projelerde digitalmedia presentation switchers çözümü
- Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
- Profesyonel kurulum ve merkezi yönetim
Sıkça Sorulan Sorular
Crestron DMPS3-4K-350-C Türkiye’de satılıyor mu?
Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.
Teknik destek ve kurulum sağlanıyor mu?
Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.
Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.
Değerlendirmeler
Henüz değerlendirme yapılmadı.