Crestron HD-MD4X2-4KZ-E — 4×2 4K60 4:4:4 HDR AV Değiştirici

Yüksek performanslı 4K60 4:4:4 AV değiştirici. Dört HDMI® girişi ve iki HDMI çıkışı sağlar. HDR (Yüksek Dinamik Aralık) ve Dolby Vision® video formatları desteğini, HDMI girişlerinin otomatik olarak değiştirilmesini, gelişmiş EDID yönetimini, Ethernet üzerinden yerel Crestron® kontrolünü, XiO Cloud®

Stok kodu: HD-MD4X2-4KZ-E Kategoriler:

Yüksek performanslı 4K60 4:4:4 AV değiştirici. Dört HDMI® girişi ve iki HDMI çıkışı sağlar. HDR (Yüksek Dinamik Aralık) ve Dolby Vision® video formatları desteğini, HDMI girişlerinin otomatik olarak değiştirilmesini, gelişmiş EDID yönetimini, Ethernet üzerinden yerel Crestron® kontrolünü, XiO Cloud® bağlantısını ve kurumsal düzeyde güvenliği içerir.

Öne Çıkan Özellikler

  • 4K60 4:4:4 dijital AV değiştirici
  • HDR10, HDR10+ ve Dolby Vision® video formatları
  • Dört HDMI® girişi ve iki HDMI çıkışı
  • Girişlerin otomatik olarak değiştirilmesi
  • EDID yönetimi
  • HDCP 2.3 uyumluluğu
  • HDMI ses ayrıştırma
  • CEC aracılığıyla cihaz kontrolü
  • Kurumsal düzeyde güvenlik
  • Dahili web arayüzü
  • Crestron® 3-Series® veya sonraki kontrol sistemleriyle uyumluluk
  • .AV Framework™ teknolojisi desteği
  • XiO Cloud® hizmet desteği
  • Kompakt yüzeye monte tasarım
  • PoE destekli cihaz (isteğe bağlı güç paketi ayrı satılır)

Teknik Özellikler

Input Signal Types HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, 4K60 4:4:4 support 1, 2 (DVI and Dual-Mode DisplayPort ™ interface compatible 3 )
Output Signal Types HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support 1, 2 (DVI compatible 4 )
Switcher 4×2 digital AV switcher
Copy Protection HDCP 2.3
Maximum Resolutions Common resolutions are listed in the following table.
Digital-To-Analog Conversion 24-bit 48 kHz
Frequency Response ±0.5 dB, 20 Hz to 20 kHz
THD+N <0.005%, 1 kHz, 10 dBV
S/N Ratio >95 dB, 10 dBV, 20 Hz to 20 KHz, A-weighted
Crosstalk ≤90 dB, 1 KHz, for multiple inputs only
Stereo Separation ≤80 dB, 20 Hz to 20 kHz
Input Signal Type HDMI (Dual-Mode DisplayPort interface compatible 3 )
Formats Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels
Output Signal Type HDMI
Source -80 dB to +20 dB adjustment range, plus Mute
Master Volume -80 dB to +20 dB adjustment range, plus Mute
Output Signal Type/Format Stereo 2-channel
Volume Control -80 dB to +20 dB adjustment range, plus Mute, Mono, and Stereo
Ethernet (2) LEDs on RJ-45 LAN connector. Link status LED: Green indicates that a 100BASE-TX link is established. Amber indicates that a 1000BASE-T link is established. Ethernet activity LED: Flashing amber indicates Ethernet activity.
USB For firmware loading and configuration management and to power a USB powered device
HDMI HDCP 2.3, EDID, CEC
HDMI IN 1-4 (4) 19-pin Type A connector, female; HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible 3 )
HDMI OUT 1-2 (2) 19-pin Type A connector, female; HDMI digital video/audio output (DVI compatible 4 )
AUDIO OUT, AUX 1-2 (2) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Output Impedance: <100 Ohms; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
LAN PoE (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port; PoE (Power over Ethernet) powered device (PD) port; IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) compliant 5
24 VDC 0.75 A (1) 2.1 x 5.5 mm DC power connector; 24 VDC power input; PW-2407WU power pack (sold separately)
SERVICE (1) USB Type A female; For firmware loading and configuration management; Can also provide up to 5 V 500 mA power to a USB powered device
G (1) 6-32 screw, chassis ground lug
PWR (1) LED. Amber indicates that the device is booting. Green indicates that the device is operational.
AUTO (1) Push button to enable or disable automatic switching and (1) green LED to indicate that automatic switching is enabled
INPUT 1-4 (4) Push buttons for manual input selection and (4) LEDs. Green indicates that the corresponding input is routed to an output. Amber indicates that a source is detected at the corresponding input but is not routed to an output.
OUTPUT 1-2 (2) Push buttons for manual output selection and (2) LEDs. Green indicates that a display or other destination device is detected and the corresponding output is transmitting video. Amber indicates that a display or other destination device is detected but no video is routed to the corresponding output.
FOLLOW (1) Push button to enable or disable Follow Output mode and (1) LED. Green indicates that Follow Output mode is enabled, which causes a selected HDMI input to be routed to both HDMI outputs simultaneously.
SETUP (1) Red LED and (1) push button for display of IP address on connected HDMI outputs
PoE IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) compliant, capable of being powered by PoE power sourcing equipment (PSE) 5
Power Pack (Optional) 0.75 A @ 24 VDC; 100-240 VAC, 50/60 Hz; Model: PW-2407WU (sold separately)
Power Consumption 12 W typical
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 40 BTU/hr typical
Acoustic Noise Not applicable (fanless)
Chassis Metal, black finish, vented sides
Mounting Surface-mountable or attachment to a single rack rail
Height 8.52 in. (217 mm)
Width 7.0 in. (178 mm)
Depth 1.34 in. (34 mm)
Regulatory Model M201946001

Kullanım Alanları

  • Kurumsal ve ticari projelerde hdmi switcher çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron HD-MD4X2-4KZ-E Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Input Signal Types

HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, 4K60 4:4:4 support 1, 2 (DVI and Dual-Mode DisplayPort ™ interface compatible 3 )

Output Signal Types

HDMI with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support 1, 2 (DVI compatible 4 )

Switcher

4×2 digital AV switcher

Copy Protection

HDCP 2.3

Maximum Resolutions

Common resolutions are listed in the following table.

Digital-To-Analog Conversion

24-bit 48 kHz

Frequency Response

±0.5 dB, 20 Hz to 20 kHz

THD+N

<0.005%, 1 kHz, 10 dBV

S/N Ratio

>95 dB, 10 dBV, 20 Hz to 20 KHz, A-weighted

Crosstalk

≤90 dB, 1 KHz, for multiple inputs only

Stereo Separation

≤80 dB, 20 Hz to 20 kHz

Input Signal Type

HDMI (Dual-Mode DisplayPort interface compatible 3 )

Formats

Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels

Output Signal Type

HDMI

Source

-80 dB to +20 dB adjustment range, plus Mute

Master Volume

-80 dB to +20 dB adjustment range, plus Mute

Output Signal Type/Format

Stereo 2-channel

Volume Control

-80 dB to +20 dB adjustment range, plus Mute, Mono, and Stereo

Ethernet

(2) LEDs on RJ-45 LAN connector. Link status LED: Green indicates that a 100BASE-TX link is established. Amber indicates that a 1000BASE-T link is established. Ethernet activity LED: Flashing amber indicates Ethernet activity.

USB

For firmware loading and configuration management and to power a USB powered device

HDMI

HDCP 2.3, EDID, CEC

HDMI IN 1-4

(4) 19-pin Type A connector, female; HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible 3 )

HDMI OUT 1-2

(2) 19-pin Type A connector, female; HDMI digital video/audio output (DVI compatible 4 )

AUDIO OUT, AUX 1-2

(2) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Output Impedance: <100 Ohms; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced

LAN PoE

(1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port; PoE (Power over Ethernet) powered device (PD) port; IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) compliant 5

24 VDC 0.75 A

(1) 2.1 x 5.5 mm DC power connector; 24 VDC power input; PW-2407WU power pack (sold separately)

SERVICE

(1) USB Type A female; For firmware loading and configuration management; Can also provide up to 5 V 500 mA power to a USB powered device

G

(1) 6-32 screw, chassis ground lug

PWR

(1) LED. Amber indicates that the device is booting. Green indicates that the device is operational.

AUTO

(1) Push button to enable or disable automatic switching and (1) green LED to indicate that automatic switching is enabled

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron HD-MD4X2-4KZ-E — 4×2 4K60 4:4:4 HDR AV Değiştirici” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top