Crestron HD-RXC-4KZ-101-1G-B — DM® Essentials 4K60 4:4:4 HDMI®, RS-232 için Alıcı ve CATx Kablo Üzerinden IR Sinyal Uzat

Bir CATx kablosu üzerinden HDMI®, RS-232 ve IR sinyallerinin noktadan noktaya genişletilmesini sağlamak için DM® Essentials verici veya DMPS Essentials değiştiriciyle birlikte çalışabilirlik. 4K60 4:4:4 videoyu, HDR10+ ve HDCP 2.3’ü destekler. 1 gruplu elektrik kutusuna monte edilir.

Stok kodu: HD-RXC-4KZ-101-1G-B Kategoriler:

Bir CATx kablosu üzerinden HDMI®, RS-232 ve IR sinyallerinin noktadan noktaya genişletilmesini sağlamak için DM® Essentials verici veya DMPS Essentials değiştiriciyle birlikte çalışabilirlik. 4K60 4:4:4 videoyu, HDR10+ ve HDCP 2.3'ü destekler. 1 gruplu elektrik kutusuna monte edilir.

Öne Çıkan Özellikler

  • DM® Essentials verici veya DMPS Essentials değiştiriciyle birlikte çalışabilirlik
  • CAT5e veya daha yüksek bir kablo üzerinden HDMI®, RS-232 ve IR sinyallerinin noktadan noktaya uzatılması
  • UHD ve 4K sinyalleri için 130 ft'ye (40 m) kadar veya 1080p, WUXGA ve 2K sinyalleri için 230 ft'ye (70 m) kadar DM Essentials iletim mesafesi
  • 4K60 4:4:4 özelliği
  • HDR10, HDR10+ ve Dolby Vision® video formatları
  • HDCP 2.3 ile uyumluluk
  • CEC (Tüketici Elektroniği Kontrolü) geçiş özelliği
  • Çift yönlü RS-232 ve IR geçiş özelliği
  • EDID geçiş özelliği
  • Siyah kaplamalı tek parçalı duvar plakası tasarımı
  • Dekoratör tarzı ön panel gereklidir (FP-G Serisi ayrı satılır)
  • Uzak DM Essentials vericisinden (yalnızca yüzeye monte edilebilir) veya DMPS Essentials değiştiriciden güç alın

Teknik Özellikler

Input Signal Type DM Essentials
Output Signal Type HDMI
Copy Protection HDCP 2.3
Resolutions Common resolutions are listed in the following table.
Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
HDMI HDCP 2.3, EDID, CEC pass-through
DM Essentials HDCP 2.3, EDID pass-through
RS-232 2-way serial pass-through up to 115.2k baud (TD/RD only)
IR Bidirectional IR signal pass-through up to 60 kHz
IR IN/OUT (1) 4-pin 3.5 mm detachable terminal block; Comprised of (1) IR input port and (1) IR output port; IR IN is for connection from a Crestron IR control port or other IR signal source and passes the IR input signal to the IR OUT port on the DM Essentials transmitter; IR OUT is for connection to an IR emitter ( IRP2 , sold separately) and transmits the IR signal from the IR IN port on the DM Essentials transmitter; Supports IR up to 60 kHz
COM (1) 3-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Passes RS-232 TD/RD data to/from the COM port on a DM Essentials transmitter; Supports up to 115.2k baud
HDMI OUT (1) Green LED, indicates that the device is transmitting an HDMI signal
DM IN (2) LEDs on RJ‑45 connector. Green indicates that a DM Essentials link is established. Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video.
24V 0.75A (1) 2-pin 3.5 mm detachable terminal block; 24VDC power input; Power pack sold separately, required only if the HD-RXC-4KZ-101-1G is used with a wall plate transmitter 3
Ground (1) Chassis ground lug
LINK (1) Green LED, indicates that a DM Essentials link is established.
PWR (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.
Power Pack Input: 100-240VAC Output: 24VDC 0.75A Model: PW-2407WUL (sold separately, required only if the HD-RXC-4KZ-101-1G is used with a wall plate transmitter) 3
Temperature 32° to 104°F (0° to 40°C)
Humidity 20% to 90% RH (non-condensing)
Composition Metal housing and bracket with black polycarbonate front label overlay
Mounting Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)
Faceplate Requires a decorator style faceplate ( FP-G series, sold separately)
Height 4.12 in. (105 mm)
Width 1.72 in. (44 mm)
Depth 2.19 in. (56 mm)
DM-CBL-ULTRA DM® Ultra Cable DM-CBL-8G DM 8G® Cable or CAT5e (UTP) or Higher

Kullanım Alanları

  • Kurumsal ve ticari projelerde receiver çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron HD-RXC-4KZ-101-1G-B Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Input Signal Type

DM Essentials

Output Signal Type

HDMI

Copy Protection

HDCP 2.3

Resolutions

Common resolutions are listed in the following table.

Digital Formats

Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels

HDMI

HDCP 2.3, EDID, CEC pass-through

DM Essentials

HDCP 2.3, EDID pass-through

RS-232

2-way serial pass-through up to 115.2k baud (TD/RD only)

IR

Bidirectional IR signal pass-through up to 60 kHz

IR IN/OUT

(1) 4-pin 3.5 mm detachable terminal block; Comprised of (1) IR input port and (1) IR output port; IR IN is for connection from a Crestron IR control port or other IR signal source and passes the IR input signal to the IR OUT port on the DM Essentials transmitter; IR OUT is for connection to an IR emitter ( IRP2 , sold separately) and transmits the IR signal from the IR IN port on the DM Essentials transmitter; Supports IR up to 60 kHz

COM

(1) 3-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Passes RS-232 TD/RD data to/from the COM port on a DM Essentials transmitter; Supports up to 115.2k baud

HDMI OUT

(1) Green LED, indicates that the device is transmitting an HDMI signal

DM IN

(2) LEDs on RJ‑45 connector. Green indicates that a DM Essentials link is established. Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video.

24V 0.75A

(1) 2-pin 3.5 mm detachable terminal block; 24VDC power input; Power pack sold separately, required only if the HD-RXC-4KZ-101-1G is used with a wall plate transmitter 3

Ground

(1) Chassis ground lug

PWR

(1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.

Power Pack

Input: 100-240VAC Output: 24VDC 0.75A Model: PW-2407WUL (sold separately, required only if the HD-RXC-4KZ-101-1G is used with a wall plate transmitter) 3

Temperature

32° to 104°F (0° to 40°C)

Humidity

20% to 90% RH (non-condensing)

Composition

Metal housing and bracket with black polycarbonate front label overlay

Mounting

Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)

Faceplate

Requires a decorator style faceplate ( FP-G series, sold separately)

Height

4.12 in. (105 mm)

Width

1.72 in. (44 mm)

Depth

2.19 in. (56 mm)

DM-CBL-ULTRA DM® Ultra Cable

DM-CBL-8G DM 8G® Cable or CAT5e (UTP) or Higher

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron HD-RXC-4KZ-101-1G-B — DM® Essentials 4K60 4:4:4 HDMI®, RS-232 için Alıcı ve CATx Kablo Üzerinden IR Sinyal Uzat” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top