Crestron DM-NAX-AMP-X300 — DM NAX® X-Serisi Esnek Çıkış Amplifikatörü, 300 W

Crestron DM-NAX-AMP-X300 — DM NAX® X-Serisi Esnek Çıkış Amplifikatörü, 300 W

DM‑NAX‑AMP‑X300 yüksek performanslı, yerden tasarruf sağlayan, enerji açısından verimli, profesyonel kalitede IP üzerinden Ses (AoIP) amplifikatörüdür. Tamamı tam DSP özelliklerine sahip DM NAX®, Dante®, AES67 ve yerel girişleri destekleyen bu çok kanallı amplifikatör, hem konut hem de ticari yapıla

Stok kodu: DM-NAX-AMP-X300 Kategoriler:

DM‑NAX‑AMP‑X300 yüksek performanslı, yerden tasarruf sağlayan, enerji açısından verimli, profesyonel kalitede IP üzerinden Ses (AoIP) amplifikatörüdür. Tamamı tam DSP özelliklerine sahip DM NAX®, Dante®, AES67 ve yerel girişleri destekleyen bu çok kanallı amplifikatör, hem konut hem de ticari yapılandırmalar için uygundur.

Öne Çıkan Özellikler

  • IP üzerinden ses (AoIP) amplifikatörü
  • Yerel Dante® modu
  • Tam DSP yetenekleri
  • Bir web arayüzü aracılığıyla kolaylaştırılmış konfigürasyon
  • 1 RU yüksekliğinde, yarım raf genişliğinde form faktörü, yüzey ve raf montajını destekler
  • Lo-Z (4/8 Ω) veya Hi-Z (70V veya 100V) çalışma için yapılandırılabilir
  • 4 x 75 W'a kadar çıkış, 2 x 150 W'a kadar çıkış, 1 x 300 W'a kadar (köprülenmiş) çıkış ve 2 x 75 W'a kadar + 1 x 150 W'a kadar (köprülenmiş) çıkış için yapılandırılabilir
  • Herhangi bir girdinin herhangi bir çıktıya matris karışımı
  • Her Zaman Açık özelliği, çok düşük güç tüketimiyle sürekli bağlantıya olanak tanır
  • DM NAX/DM NVX®, AES67 veya Dante cihazlarına yönlendirmek için doğrudan yönetilen bir ağa bağlanır
  • Mikrofon/hat seviyesi analog girişlerini ve dengeli/dengesiz hat seviyesi çıkışlarını destekler
  • Bireysel bölge güç kontrolü ve küresel bekleme
  • Crestron Home® OS ve SIMPL Windows programlamayla sorunsuz Crestron sistemi entegrasyonu

Teknik Özellikler

Input Signal Types Balanced/unbalanced analog line/mic-level and AoIP streams.
Balanced Analog Input Maximum signal level: +21 dBu (8.7 Vrms) Impedance: >10k Ohms ƒ Response: 20 Hz to 20 kHz±0.5 dB THD+N: <0.005% @ 1 KHz S/N Ratio: 105 dB A-weight Channel Separation: 100 dB @ 1 KHz
Mic Input Maximum gain: 60 dB Impedance: >10k Ohms ƒ Response: 20 Hz to 20 kHz±0.5 dB THD+N: <0.005% @ 1 KHz @ 60 dB gain S/N Ratio: 71 dB @ 60 dB gain A-weight Channel Separation: 69 dB @ 60 dB gain @ 1 KHz
Balanced Analog Output Maximum signal level: +21 dBu (8.7 Vrms) Impedance: 200 Ohms ƒ Response: 20 Hz to 20 kHz ±0.5 dB THD+N: 0.005% @ 1 kHz at max output S/N Ratio: 113 dB digital in, 105 dB analog in, 20 Hz -20 kHz, A-weight Channel Separation: 100 dB @ 1 KHz
Speaker Output ƒ Response: 20 Hz to 20 kHz ±0.5 dB at 1 W High-Pass Filter (70V and 100V operation only): -3 dB @ 80 Hz, -12 dB/octave THD+N: <0.1% at 1 kHz @ -3 dB full rated output power S/N Ratio: >103 dB, 20 Hz to 20 kHz, balanced Crosstalk: -75 dB at 1 kHz Gain: 29 dB @ 8 Ω Protection: Over current, under voltage, over temperature, DC offset, extreme high frequency Go to Sleep Time: 25 minutes with no signal present (when set to POWER SAVER) Wake Time: 0.5 s typical
CH1-CH4 (2) 4-pin 5.08 mm pitch, 12A plug with screw locking retainers; Power amplifier output; Terminals accept up to 12 AWG (3.31 mm) NOTE: Output is direct-coupled, not transformer isolated.
IN1-IN4 (4) 3-pin 3.5 mm detachable terminal block; Balanced/unbalanced line or mic-level audio inputs; Maximum Input Level: 8.7 Vrms, +21 dBu; Input Impedance: 10k Ω Wake threshold is -65 dBu; Phantom power is available when used as mic-level inputs
OUT1-OUT4 (4) 3-pin 3.5 mm detachable terminal block; Balanced/unbalanced line-level audio outputs; Maximum Output Level: 8.7 Vrms, +21 dBu
REMOTE (1) 2-pin 3.5 mm detachable terminal block; Connect to dry contact closure to place amplifier in standby mode
G (1) 6-32 screw; Chassis ground lug
100-240V~ 1.2-0.6A 50/60 Hz (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included
Ethernet 1 (1) 8-wire RJ45 female; 100Base-T/1000Base‑TX Ethernet port
Ethernet 2 (1) 8-wire RJ45 female; 100Base-T/1000Base‑TX Ethernet port
PWR (1) LED; White indicates amplifier is on and ready for use; Amber indicates the amplifier is booting; Red indicates amplifier is in standby
HI-Z (1) White LED; Indicates when Hi-Z mode is enabled (70V or 100V)
LAN (1) White LED; Indicates that the device has a valid IP address
AoIP (1) White LED; Indicates an active AoIP stream
FAULT (4) Red LEDs (one per speaker output); Indicates that the input channel has a fault or is clipping
SIGNAL (4) White LEDs (one per speaker output); Indicates an active input signal
LOCKOUT (1) Red LED; Indicates that rear panel slide switches are being overridden by programmatic or web UI control
Lo-Z MODES (2) Slide switches, one switch controlling channels 1 and 2, and one switch controlling channels 3 and 4; Selects stereo, summed, or bridged operation: STEREO: The input signal received on each channel is sent to its respective output for use in applications where left and right channel separation is required. SUM: The input signals sent to a channel pair (1 + 2 or 3 + 4) are summed and sent to their respective individual outputs. BRIDGE: The input signals sent to a channel pair (1 + 2 or 3 + 4) are summed and sent to a bridged output (1 + 2 or 3 + 4) for use in high power applications.
Operations Mode (1) Slide switch; Sets the amplifier for Lo-Z (4 or 8 Ω) or Hi-Z operation (70V or 100V)
Power Mode (1) Slide switch; Selects Power Saver or Always On operation
SETUP (1) Red LED and push button; Utilized in some restore procedures
Main Power 1.2-0.6A @ 100-240VAC, 50/60 Hz
Power Consumption 75 W (All channels driven at 1/8th power, 8 ohms)
Temperature 41 to 104°F (5° to 40°C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 130 BTU/hr
Height 1.74 in. (44 mm)
Width 9.38 in. (238 mm)
Depth 11.03 in. (280 mm)

Kullanım Alanları

  • Kurumsal ve ticari projelerde amplifikatörler çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron DM-NAX-AMP-X300 Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron
Input Signal Types

Balanced/unbalanced analog line/mic-level and AoIP streams.
Balanced Analog Input

Maximum signal level: +21 dBu (8.7 Vrms) Impedance: >10k Ohms ƒ Response: 20 Hz to 20 kHz±0.5 dB THD+N: <0.005% @ 1 KHz S/N Ratio: 105 dB A-weight Channel Separation: 100 dB @ 1 KHz
Mic Input

Maximum gain: 60 dB Impedance: >10k Ohms ƒ Response: 20 Hz to 20 kHz±0.5 dB THD+N: <0.005% @ 1 KHz @ 60 dB gain S/N Ratio: 71 dB @ 60 dB gain A-weight Channel Separation: 69 dB @ 60 dB gain @ 1 KHz
Balanced Analog Output

Maximum signal level: +21 dBu (8.7 Vrms) Impedance: 200 Ohms ƒ Response: 20 Hz to 20 kHz ±0.5 dB THD+N: 0.005% @ 1 kHz at max output S/N Ratio: 113 dB digital in, 105 dB analog in, 20 Hz -20 kHz, A-weight Channel Separation: 100 dB @ 1 KHz
Speaker Output

ƒ Response: 20 Hz to 20 kHz ±0.5 dB at 1 W High-Pass Filter (70V and 100V operation only): -3 dB @ 80 Hz, -12 dB/octave THD+N: <0.1% at 1 kHz @ -3 dB full rated output power S/N Ratio: >103 dB, 20 Hz to 20 kHz, balanced Crosstalk: -75 dB at 1 kHz Gain: 29 dB @ 8 Ω Protection: Over current, under voltage, over temperature, DC offset, extreme high frequency Go to Sleep Time: 25 minutes with no signal present (when set to POWER SAVER) Wake Time: 0.5 s typical
CH1-CH4

(2) 4-pin 5.08 mm pitch, 12A plug with screw locking retainers; Power amplifier output; Terminals accept up to 12 AWG (3.31 mm) NOTE: Output is direct-coupled, not transformer isolated.
IN1-IN4

(4) 3-pin 3.5 mm detachable terminal block; Balanced/unbalanced line or mic-level audio inputs; Maximum Input Level: 8.7 Vrms, +21 dBu; Input Impedance: 10k Ω Wake threshold is -65 dBu; Phantom power is available when used as mic-level inputs
OUT1-OUT4

(4) 3-pin 3.5 mm detachable terminal block; Balanced/unbalanced line-level audio outputs; Maximum Output Level: 8.7 Vrms, +21 dBu
REMOTE

(1) 2-pin 3.5 mm detachable terminal block; Connect to dry contact closure to place amplifier in standby mode
G

(1) 6-32 screw; Chassis ground lug
100-240V~ 1.2-0.6A 50/60 Hz

(1) IEC 60320 C14 main power inlet; Mates with removable power cord, included
Ethernet 1

(1) 8-wire RJ45 female; 100Base-T/1000Base‑TX Ethernet port
Ethernet 2

(1) 8-wire RJ45 female; 100Base-T/1000Base‑TX Ethernet port
PWR

(1) LED; White indicates amplifier is on and ready for use; Amber indicates the amplifier is booting; Red indicates amplifier is in standby
HI-Z

(1) White LED; Indicates when Hi-Z mode is enabled (70V or 100V)
LAN

(1) White LED; Indicates that the device has a valid IP address
AoIP

(1) White LED; Indicates an active AoIP stream
FAULT

(4) Red LEDs (one per speaker output); Indicates that the input channel has a fault or is clipping
SIGNAL

(4) White LEDs (one per speaker output); Indicates an active input signal
LOCKOUT

(1) Red LED; Indicates that rear panel slide switches are being overridden by programmatic or web UI control
Lo-Z MODES

(2) Slide switches, one switch controlling channels 1 and 2, and one switch controlling channels 3 and 4; Selects stereo, summed, or bridged operation: STEREO: The input signal received on each channel is sent to its respective output for use in applications where left and right channel separation is required. SUM: The input signals sent to a channel pair (1 + 2 or 3 + 4) are summed and sent to their respective individual outputs. BRIDGE: The input signals sent to a channel pair (1 + 2 or 3 + 4) are summed and sent to a bridged output (1 + 2 or 3 + 4) for use in high power applications.
Operations Mode

(1) Slide switch; Sets the amplifier for Lo-Z (4 or 8 Ω) or Hi-Z operation (70V or 100V)
Power Mode

(1) Slide switch; Selects Power Saver or Always On operation
SETUP

(1) Red LED and push button; Utilized in some restore procedures
Main Power

1.2-0.6A @ 100-240VAC, 50/60 Hz
Power Consumption

75 W (All channels driven at 1/8th power, 8 ohms)
Temperature

41 to 104°F (5° to 40°C)
Humidity

10% to 90% RH (non-condensing)
Heat Dissipation

130 BTU/hr
Height

1.74 in. (44 mm)

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron DM-NAX-AMP-X300 — DM NAX® X-Serisi Esnek Çıkış Amplifikatörü, 300 W” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

İlgili ürünler

Scroll to Top