Crestron SAROS-DM-NAX-IC4A-W - Kurulumunuzu Crestron hoparlörlerle tamamlayın. SAROS DM-NAX

Crestron SAROS-DM-NAX-IC4A-W – Kurulumunuzu Crestron hoparlörlerle tamamlayın. SAROS DM-NAX

Kurulumunuzu Crestron hoparlörlerle tamamlayın. SAROS DM-NAX-IC4A-W, geniş kapsama açıları ve basit kurulum sunan, Dengeli Mod Radyatör (BMR) dönüştürücüye sahip tavan içi, PoE+, IP üzerinden Ses hoparlörüdür.

Stok kodu: SAROS-DM-NAX-IC4A-W Kategoriler:

Kurulumunuzu Crestron hoparlörlerle tamamlayın. SAROS DM-NAX-IC4A-W, geniş kapsama açıları ve basit kurulum sunan, Dengeli Mod Radyatör (BMR) dönüştürücüye sahip tavan içi, PoE+, IP üzerinden Ses hoparlörüdür.

Teknik Özellikler

Transducer 2.83 in. (72 mm) Balanced Mode Radiator (BMR)
Frequency Response 80 Hz to 24 kHz (±3 dB)
Sensitivity 86 dB @ -18 dBFS/1 m
Maximum SPL 96 dB
Coverage 170° conical (speech, up to 4 kHz); 140° conical (music, up to 8 kHz)
BMR Power Handling 25 W
BMR Power Output Up to 21 W
EQ Filter Types EQ, High Pass, Low Pass, Treble Shelf, Bass Shelf, Notch
EQ Center Frequency 10 to 20,000 Hz per band
EQ Gain +20/-40 dB per band
EQ Bandwidth 0.1 to 4.0 octaves per band
SPEAKER-LEVEL OUTPUTS 1-3 (3) 8-pin RJ-45 connector, female; Speaker-level audio output; For use with SAROS IC4P‑W only; For plenum rated patch cable, use CBL‑ZUMLINK‑P‑25 (sold separately) or third-party Cat5 cable 32 ft. (10 m) or shorter 1
Network/PoE+ (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port; PoE+ PD (powered device) port; IEEE 802.3at Type 2 PoE+ Class 4 (25.5 W) compliant; Receives up to two stereo DM NAX AoIP streams or two stereo AES67 streams
Ethernet (2) Bi-color green/amber LEDs; Left LED indicates Ethernet link status; RIght LED indicates Ethernet activity
Power (1) Bi-color white/red LED behavior determined via web UI configuration; White indicates that the device is powered on with audio passing or that signal is present; Red indicates that the device is in standby mode, that a fault is present, or that SETUP is pressed; Off indicates no power from the power supply or that the LED has been disabled from the web UI
SETUP (1) Recessed push button; Pressing and holding the SETUP button for 15 seconds with power supplied clears network settings and restores the default DHCP mode; Pressing and holding the SETUP button with power disconnected, then connecting the power supply and continuing to hold SETUP for 30 seconds will perform a factory restore
PoE+ IEEE 802.3at Type 2 Class 4 (25.5 W) compliant
Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (noncondensing)
Enclosure Painted steel, plenum-rated; 0.75 in. (19 mm) conduit knockout on top and sides; (1) cable clamp included
Baffle ABS UL® 94V‑0 plastic
Grille Steel with white textured finish; Magnetically held; Safety tether included
Mounting Flush ceiling mount using 4 integral 2-step toggle clamps; 2.36 in. (60 mm) maximum clamping thickness; 6.5 in. (165 mm) recommended cutout diameter; Tile bridge included
Baffle Diameter 7.49 in. (191 mm) not including mounting clamps
Back Can Diameter 6.33 in. (161 mm) not including mounting clamps
Depth 4.28 in. (109 mm) mounting depth; 4.50 in. (115 mm) including grille

Kullanım Alanları

  • Kurumsal ve ticari projelerde dm nax intelligent audio çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron SAROS-DM-NAX-IC4A-W Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron
Transducer

2.83 in. (72 mm) Balanced Mode Radiator (BMR)
Frequency Response

80 Hz to 24 kHz (±3 dB)
Sensitivity

86 dB @ -18 dBFS/1 m
Maximum SPL

96 dB
Coverage

170° conical (speech, up to 4 kHz); 140° conical (music, up to 8 kHz)
BMR Power Handling

25 W
BMR Power Output

Up to 21 W
EQ Filter Types

EQ, High Pass, Low Pass, Treble Shelf, Bass Shelf, Notch
EQ Center Frequency

10 to 20,000 Hz per band
EQ Gain

+20/-40 dB per band
EQ Bandwidth

0.1 to 4.0 octaves per band
SPEAKER-LEVEL OUTPUTS 1-3

(3) 8-pin RJ-45 connector, female; Speaker-level audio output; For use with SAROS IC4P‑W only; For plenum rated patch cable, use CBL‑ZUMLINK‑P‑25 (sold separately) or third-party Cat5 cable 32 ft. (10 m) or shorter 1
Network/PoE+

(1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port; PoE+ PD (powered device) port; IEEE 802.3at Type 2 PoE+ Class 4 (25.5 W) compliant; Receives up to two stereo DM NAX AoIP streams or two stereo AES67 streams
Ethernet

(2) Bi-color green/amber LEDs; Left LED indicates Ethernet link status; RIght LED indicates Ethernet activity
Power

(1) Bi-color white/red LED behavior determined via web UI configuration; White indicates that the device is powered on with audio passing or that signal is present; Red indicates that the device is in standby mode, that a fault is present, or that SETUP is pressed; Off indicates no power from the power supply or that the LED has been disabled from the web UI
SETUP

(1) Recessed push button; Pressing and holding the SETUP button for 15 seconds with power supplied clears network settings and restores the default DHCP mode; Pressing and holding the SETUP button with power disconnected, then connecting the power supply and continuing to hold SETUP for 30 seconds will perform a factory restore
PoE+

IEEE 802.3at Type 2 Class 4 (25.5 W) compliant
Temperature

32° to 104°F (0° to 40°C)
Humidity

10% to 90% RH (noncondensing)
Enclosure

Painted steel, plenum-rated; 0.75 in. (19 mm) conduit knockout on top and sides; (1) cable clamp included
Baffle

ABS UL® 94V‑0 plastic
Grille

Steel with white textured finish; Magnetically held; Safety tether included
Mounting

Flush ceiling mount using 4 integral 2-step toggle clamps; 2.36 in. (60 mm) maximum clamping thickness; 6.5 in. (165 mm) recommended cutout diameter; Tile bridge included
Baffle Diameter

7.49 in. (191 mm) not including mounting clamps
Back Can Diameter

6.33 in. (161 mm) not including mounting clamps
Depth

4.28 in. (109 mm) mounting depth; 4.50 in. (115 mm) including grille

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron SAROS-DM-NAX-IC4A-W – Kurulumunuzu Crestron hoparlörlerle tamamlayın. SAROS DM-NAX” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

İlgili ürünler

Scroll to Top