Crestron AMP-X50MP — X Serisi Medya Sunum Amplifikatörü, 50 W

X Serisi Medya Sunum Amplifikatörü, 50 W

Stok kodu: AMP-X50MP Kategoriler:

Medya sunum sistemleri için kompakt, verimli bir stereo amplifikatör.

Teknik Özellikler

Input Signal Types Balanced or unbalanced analog line-level
Frequency Response LoZ (4-8 Ohms): 20 Hz to 20kHz +/-0.5 dB at 1 W; Hi-Z (70V/100V): 90 Hz to 20kHz +/-3 dB at 1 W; HPF @ 80 Hz (+/-10 Hz), -12 dB/Octave
THD+N < 0.1 % at 1kHz @ -3 dB full rated output power
S/N Ratio > 90 dBA, 20 Hz to 20kHz, balanced, Hi-Z
Crosstalk -75 dB at 1 kHz
Input Sensitivity 1.23Vrms, +4 dBu balanced; 0.316Vrms, -10 dBV unbalanced; For 25 W @ 8 Ohms 50 W @ 70V/100V
Gain 21.5 dB @ 8 Ohms, Balanced
Wake Signal Threshold -57 dBu (1 mV) max
Protection Clip limiter, over current, under voltage, over temperature, DC offset, extreme high frequency
Speaker Output (1) 6-pin, 5.08 mm pitch, 12A plug with screw locking retainers; Power amplifier outputs; Wire Size: Terminals accept up to 12AWG (3.31 mm 2 )
ALS OUT (1) 3.5 mm connector, female; Unbalanced line level audio outputs; Maximum Output Level: 2.24Vrms, +7 dBV (+9.2 dBu); Fixed audio output for assisted listening devices duplicates the summed audio input
AUDIO IN 1-2 (unbalanced) (1) 3.5 mm connector, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24Vrms, +7 dBV (+9.2 dBu)
AUDIO IN 1-2 (balanced) (1) 5 pin 3.5 mm detachable terminal block; Balanced line level audio inputs; Maximum Input Level: 7.75Vrms, +20 dBu; Input Impedance: 20k Ohms
REMOTE (1) 2 pin 3.5 mm detachable terminal block; Connect to contact closure to place amplifier in standby mode.
G (1) M3 with captivated internal tooth lock washer screw; Chassis ground lug
24V, 2.5A (1) External 60 W desktop power supply (24VDC/2.5A); Mates with locking barrel connector DC cord; Power supply included.
PWR (1) Bi-color white/red LED; White indicates operating power supplied; Red indicates standby mode.
FAULT (1) Red LED; Indicates an over temperature or over current fault
SIGNAL (1) Bi-color white/red LED; White indicates input signal presence; Red indicates input signal clipping/limiting
Hi-Z (1) White LED; Indicates speaker output is in Hi-Z (70V/100V) mode
MONO/STEREO (1) Slide switch to select STEREO, MONO; STEREO preserves channels; MONO creates a mono downmix of the input signals
Hi-Z/LoZ (1) Slide switch to select LoZ (low impedance 4-8 ohms) or Hi-Z (high impedance 70V/100V)
VOLUME, BASS, TREBLE (3) Rotary knobs adjust volume, bass (+/- 6 dB), and treble (+/- 6 dB) levels
Main Power 24VDC, 2.5A; 100-240VAC, 50/60 Hz, 1.5A power supply included
Power Consumption 14.6 W, 2 channels driven at 1/8th output power (4 ohms); 6 W, idle (Hi-Z mode)
Temperature 41° to 104°F (5° to 40°C)
Humidity 10% to 90% RH (non‑condensing)
Chassis Metal, convection cooled (fanless)
Front Panel Metal, black finish with polycarbonate label overlay
Mounting Freestanding, surface mount, or 1/4 width 1 RU 19 in. rack mountable; Gangable with other Crestron modular and X series products (adhesive feet and surface mounting brackets included); Ganging kit and rack mounting kit optional
Knob Cover Polycarbonate transparent material
Height 1.74 in. (44 mm) without feet; 1.85 in. (47 mm) with surface kit
Width 4.33 in. (110 mm); 5.58 in. (142 mm) with surface kit
Depth 6.99 in. (178 mm) without knob cover; 7.57 in. (192 mm) with knob cover

Kullanım Alanları

  • Kurumsal ve ticari projelerde amplifikatörler çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron AMP-X50MP Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Input Signal Types

Balanced or unbalanced analog line-level

Frequency Response

LoZ (4-8 Ohms): 20 Hz to 20kHz +/-0.5 dB at 1 W; Hi-Z (70V/100V): 90 Hz to 20kHz +/-3 dB at 1 W; HPF @ 80 Hz (+/-10 Hz), -12 dB/Octave

THD+N

< 0.1 % at 1kHz @ -3 dB full rated output power

S/N Ratio

> 90 dBA, 20 Hz to 20kHz, balanced, Hi-Z

Crosstalk

-75 dB at 1 kHz

Input Sensitivity

1.23Vrms, +4 dBu balanced; 0.316Vrms, -10 dBV unbalanced; For 25 W @ 8 Ohms 50 W @ 70V/100V

Gain

21.5 dB @ 8 Ohms, Balanced

Wake Signal Threshold

-57 dBu (1 mV) max

Protection

Clip limiter, over current, under voltage, over temperature, DC offset, extreme high frequency

Speaker Output

(1) 6-pin, 5.08 mm pitch, 12A plug with screw locking retainers; Power amplifier outputs; Wire Size: Terminals accept up to 12AWG (3.31 mm 2 )

ALS OUT

(1) 3.5 mm connector, female; Unbalanced line level audio outputs; Maximum Output Level: 2.24Vrms, +7 dBV (+9.2 dBu); Fixed audio output for assisted listening devices duplicates the summed audio input

AUDIO IN 1-2 (unbalanced)

(1) 3.5 mm connector, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24Vrms, +7 dBV (+9.2 dBu)

AUDIO IN 1-2 (balanced)

(1) 5 pin 3.5 mm detachable terminal block; Balanced line level audio inputs; Maximum Input Level: 7.75Vrms, +20 dBu; Input Impedance: 20k Ohms

REMOTE

(1) 2 pin 3.5 mm detachable terminal block; Connect to contact closure to place amplifier in standby mode.

G

(1) M3 with captivated internal tooth lock washer screw; Chassis ground lug

24V, 2.5A

(1) External 60 W desktop power supply (24VDC/2.5A); Mates with locking barrel connector DC cord; Power supply included.

PWR

(1) Bi-color white/red LED; White indicates operating power supplied; Red indicates standby mode.

FAULT

(1) Red LED; Indicates an over temperature or over current fault

SIGNAL

(1) Bi-color white/red LED; White indicates input signal presence; Red indicates input signal clipping/limiting

Hi-Z

(1) White LED; Indicates speaker output is in Hi-Z (70V/100V) mode

MONO/STEREO

(1) Slide switch to select STEREO, MONO; STEREO preserves channels; MONO creates a mono downmix of the input signals

Hi-Z/LoZ

(1) Slide switch to select LoZ (low impedance 4-8 ohms) or Hi-Z (high impedance 70V/100V)

VOLUME, BASS, TREBLE

(3) Rotary knobs adjust volume, bass (+/- 6 dB), and treble (+/- 6 dB) levels

Main Power

24VDC, 2.5A; 100-240VAC, 50/60 Hz, 1.5A power supply included

Power Consumption

14.6 W, 2 channels driven at 1/8th output power (4 ohms); 6 W, idle (Hi-Z mode)

Temperature

41° to 104°F (5° to 40°C)

Humidity

10% to 90% RH (non‑condensing)

Chassis

Metal, convection cooled (fanless)

Front Panel

Metal, black finish with polycarbonate label overlay

Mounting

Freestanding, surface mount, or 1/4 width 1 RU 19 in. rack mountable; Gangable with other Crestron modular and X series products (adhesive feet and surface mounting brackets included); Ganging kit and rack mounting kit optional

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron AMP-X50MP — X Serisi Medya Sunum Amplifikatörü, 50 W” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top