Crestron DIN-GWDL — Dijital Aydınlatma Ağ Geçidi, DIN Ray Montajı

DIN‑GWDL, Crestron aydınlatma armatürleri ve Crestron uyumlu üçüncü taraf aydınlatma armatürleri için bir ağ geçididir. Bağlı tüm aydınlatma yüklerinin tam kontrolünü sağlar. DIN‑GWDL, Crestron Home Kurulum uygulaması kullanılarak yapılandırılır ve bir Crestron Home sistemi kullanılarak kontrol edil

Stok kodu: DIN-GWDL Kategoriler:

DIN‑GWDL, Crestron aydınlatma armatürleri ve Crestron uyumlu üçüncü taraf aydınlatma armatürleri için bir ağ geçididir. Bağlı tüm aydınlatma yüklerinin tam kontrolünü sağlar. DIN‑GWDL, Crestron Home Kurulum uygulaması kullanılarak yapılandırılır ve bir Crestron Home sistemi kullanılarak kontrol edilir.

Öne Çıkan Özellikler

  • Crestron Home® İşletim Sistemi için özel olarak tasarlandı
  • 64 adede kadar doğrudan bağlı Crestron aydınlatma armatürünü ve Crestron uyumlu üçüncü taraf aydınlatma armatürlerini destekler
  • Destek, DIN-GWDL-SPLTR (ayrıca satılır) kullanımıyla 85'e kadar Crestron aydınlatma armatürüne ve Crestron uyumlu üçüncü taraf aydınlatma armatürüne kadar genişletildi
  • Standart CAT5 kablo kullanılarak hızlı kablolama için RJ-45 adaptörleri dahildir
  • Lokal kontrol ile herhangi bir kontrol sistemine ihtiyaç duymadan tüm ışıkları açıp kapatabilme özelliği
  • Crestron Home Kurulum Uygulaması aracılığıyla otomatik adresleme ve hızlı devreye alma
  • Crestron SolarSync® sensörleriyle uyumlu
  • Crestron Işık Armatür Yapılandırma Aracını kullanarak sipariş verin
  • 6U 35 mm DIN rayına monte edilebilir

Teknik Özellikler

DMX-C Supports discovery, auto-addressing and fixture data; DMX-C communications with Crestron light fixtures and Crestron compatible third-party light fixtures
Ethernet 100BASE-TX Ethernet; Static IP or DHCP
LAN PoE Class 2 (1) 8-pin RJ-45 connector, female; 100BASE-TX Ethernet port; PoE (Power over Ethernet) PD (Powered Device)
9-48VDC (1) 3-pin 5.18 mm terminal block; 9 – 48VDC, 5W max; Use only when not powering the device using PoE
DMX 1-2 (2) 3-pin 5.18 mm terminal blocks; Isolated DMX-C outputs; One universe split between two ports; Each output supports up to 32 directly connected devices Wiring: Use shielded CAT5 wire or better with a shielded connector, do not connect drain to ground; 24 AWG minimum; RJ-45 to 3-pin adapters included to make CAT5 STP connections; Daisy chain all fixtures, do not create loops; 1,000 ft (305 m) maximum per output Termination: Terminate all daisy chain runs with the termination resistor included with the fixtures; Terminate the connection to a DIN-GWDL-SPLTR with the 120 Ω termination resistor included with the DIN-GWDL-SPLTR between the + and – pins on the terminal block that connects to DMX IN
INPUTS and OUTPUTS (1) 8-pin 5.18 mm terminal block, shared between INPUTS and OUTPUTS INPUTS 1-2: (2) inputs for contact closure, INPUT 1 contact controls Override mode and INPUT 2 contact controls the lights when Override mode is on; INPUT 1: When the contact is closed, Override mode is turned on. When the contact is open, Override mode is turned off and the lights operates normally; INPUT 2: When the contact is closed, the lights turn off. When the contact is open, the lights turn on OUTPUTS 1-2: (2) individually isolated (1KV) relay outputs (48V 250mA); Repeats signal from corresponding INPUT 1 or 2; Connect to additional DIN-GWDL INPUTS or other device override inputs
N/A Not used
MODE Rotary Dial (1) Dial for selecting different test modes for DMX outputs
SELECT Button (1) Push button function varies based on test mode selected
RESET Button (1) Recessed push button for software reset
PWR LED (1) Red LED indicates operating power is supplied
ACTIVE LED (1) Red LED indicates device is active
ETHERNET LED (1) Red LED indicates ethernet activity
I/O LED (1) Red LED flashes when a change occurs on the INPUT or OUTPUT terminals
N/A LED Not used
DMX LED (1) Red LED indicates DMX activity
OUTPUT LED (1) Red LED indicates that the device is actively controlling the lights
PoE IEEE 802.3af Class 2 (6.49 W) compliant; Use CEN-SW-POE-5 or other IEEE 8.2.3af compliant PSE
Power Pack (Optional) 9-48VDC; Use Crestron power supplies PW-2407-RU , PW-2407WUL , DIN-PWS60 , or DIN-PWS30-277 (all sold separately)
Power Consumption 5 W max
Temperature 32° to 122°F (0° to 50°C)
Humidity 10% to 90% RH (noncondensing)
Mounting 6 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail))
Ingress Protection IP40
Height 3.74 in. (95 mm); 4.96 in. (126 mm) with terminal blocks and RJ-45 adapters
Width 4.23 in. (108 mm)
Depth 1.73 in. (44 mm)

Kullanım Alanları

  • Kurumsal ve ticari projelerde din modules çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron DIN-GWDL Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

DMX-C

Supports discovery, auto-addressing and fixture data; DMX-C communications with Crestron light fixtures and Crestron compatible third-party light fixtures

Ethernet

100BASE-TX Ethernet; Static IP or DHCP

LAN PoE Class 2

(1) 8-pin RJ-45 connector, female; 100BASE-TX Ethernet port; PoE (Power over Ethernet) PD (Powered Device)

9-48VDC

(1) 3-pin 5.18 mm terminal block; 9 – 48VDC, 5W max; Use only when not powering the device using PoE

DMX 1-2

(2) 3-pin 5.18 mm terminal blocks; Isolated DMX-C outputs; One universe split between two ports; Each output supports up to 32 directly connected devices Wiring: Use shielded CAT5 wire or better with a shielded connector, do not connect drain to ground; 24 AWG minimum; RJ-45 to 3-pin adapters included to make CAT5 STP connections; Daisy chain all fixtures, do not create loops; 1,000 ft (305 m) maximum per output Termination: Terminate all daisy chain runs with the termination resistor included with the fixtures; Terminate the connection to a DIN-GWDL-SPLTR with the 120 Ω termination resistor included with the DIN-GWDL-SPLTR between the + and – pins on the terminal block that connects to DMX IN

INPUTS and OUTPUTS

(1) 8-pin 5.18 mm terminal block, shared between INPUTS and OUTPUTS INPUTS 1-2: (2) inputs for contact closure, INPUT 1 contact controls Override mode and INPUT 2 contact controls the lights when Override mode is on; INPUT 1: When the contact is closed, Override mode is turned on. When the contact is open, Override mode is turned off and the lights operates normally; INPUT 2: When the contact is closed, the lights turn off. When the contact is open, the lights turn on OUTPUTS 1-2: (2) individually isolated (1KV) relay outputs (48V 250mA); Repeats signal from corresponding INPUT 1 or 2; Connect to additional DIN-GWDL INPUTS or other device override inputs

N/A

Not used

MODE Rotary Dial

(1) Dial for selecting different test modes for DMX outputs

SELECT Button

(1) Push button function varies based on test mode selected

RESET Button

(1) Recessed push button for software reset

PWR LED

(1) Red LED indicates operating power is supplied

ACTIVE LED

(1) Red LED indicates device is active

ETHERNET LED

(1) Red LED indicates ethernet activity

I/O LED

(1) Red LED flashes when a change occurs on the INPUT or OUTPUT terminals

N/A LED

Not used

DMX LED

(1) Red LED indicates DMX activity

OUTPUT LED

(1) Red LED indicates that the device is actively controlling the lights

PoE

IEEE 802.3af Class 2 (6.49 W) compliant; Use CEN-SW-POE-5 or other IEEE 8.2.3af compliant PSE

Power Pack (Optional)

9-48VDC; Use Crestron power supplies PW-2407-RU , PW-2407WUL , DIN-PWS60 , or DIN-PWS30-277 (all sold separately)

Power Consumption

5 W max

Temperature

32° to 122°F (0° to 50°C)

Humidity

10% to 90% RH (noncondensing)

Mounting

6 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail))

Ingress Protection

IP40

Height

3.74 in. (95 mm); 4.96 in. (126 mm) with terminal blocks and RJ-45 adapters

Width

4.23 in. (108 mm)

Depth

1.73 in. (44 mm)

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron DIN-GWDL — Dijital Aydınlatma Ağ Geçidi, DIN Ray Montajı” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top