Crestron DIN-THSTAT — Isıtma, Soğutma ve Bağıl Nem Termostatı, DIN Ray Montajlı

DIN‑THSTAT, DIN rayına monte edilebilir bir ısıtma, soğutma ve bağıl nem termostatıdır. DIN‑THSTAT radyant yerden ısıtma, basınçlı hava ve ısı pompası HVAC sistemlerinin kontrolünü sağlar. DIN rayına montaj, bir ekipman kabinine kuruluma olanak tanır ve yaşam alanını duvara monte termostattan uzak t

Stok kodu: DIN-THSTAT Kategoriler:

DIN‑THSTAT, DIN rayına monte edilebilir bir ısıtma, soğutma ve bağıl nem termostatıdır. DIN‑THSTAT radyant yerden ısıtma, basınçlı hava ve ısı pompası HVAC sistemlerinin kontrolünü sağlar. DIN rayına montaj, bir ekipman kabinine kuruluma olanak tanır ve yaşam alanını duvara monte termostattan uzak tutar. Küçük, göze çarpmayan uzaktan sıcaklık ve nem sensörleri, odadaki çevre koşullarını toplar ve verileri DIN‑THSTAT'a iletir.

Öne Çıkan Özellikler

  • Crestron® uzak sıcaklık sensörleriyle çalışır (ayrıca satılır)
  • Tam bir Crestron otomasyon sisteminin parçası olarak çalışır (ayrı olarak satılır)
  • Sistem kurulumu ve testi için yerleşik kontroller
  • System integration via Cresnet® wired communications
  • Cresnet destekli (24VDC)
  • Arkadan aydınlatmalı LCD ekran
  • Kurulum, sıcaklık ve nem ayarları için ön panel kontrolleri
  • 9M genişliğinde DIN rayına monte edilebilir

Teknik Özellikler

Indoor Temperature 32° to 110°F (0° to 43°C)
Outdoor Temperature -40° to 170°F (-40° to 77°C) NOTE : Outdoor temperature measurement is -30° to 120°F (-34° to 49°C) if thermistor sensors are used.
Humidity 10% to 90% RH (noncondensing)
Auto 38° to 99°F (3° to 37°C)
Heat 38° to 89°F (3° to 32°C)
Cool 59° to 99°F (15° to 37°C)
Power Consumption 3 W (125 mA @ 24VDC)
Cresnet® Wired Control system integration or networking
Keypad (1) 5-way navigation pad; For menu navigation and temperature/humidity adjustments
HOME (1) pushbutton; Returns to the previous screen or the home screen
BACK (1) pushbutton; Steps menu back one level
Type RGB LCD
Size 1.80 in. (46 mm) diagonal
Resolution 176 x 220
Function Front panel display to view temperature and humidity settings; Used for local configuration
Y1, Y2, Y3 (1) Compressor stage 1, 2, and 3
G (1) Fan relay
B (1) Active in non-cool modes
O (1) Active in cool mode
RC (1) Reference cool
RH (1) Reference heat
W1, W2, W3 (1) Heat stage 1, 2, and 3
HUM (1) Humidity call switch power
AUX1, AUX2 (2) Output relay to interface with other HVAC devices
AUX-IN (1) Signal from HVAC state sensing or other custom programming
TS1, TS2, G (2) Remote sensor inputs and (2) ground inputs; For indoor remote temperature sensor ( CHV‑RTS ), remote slab sensor ( CHV‑RSS ), remote temperature and humidity sensors ( CHV‑RTHS ), and 10k thermistors (all sensors and thermistors are sold separately); Each temperature sensor requires a dedicated low-capacitance twisted pair wire (<7 nF per run) and supports a wire length of 500 ft (152 m) using CAT5. Thermostat wire is not recommended, but may be used if necessary at lengths up to 100 ft (30 m).
TS3, G (1) From outdoor remote temperature sensor and (1) ground; Also compatible with 10k thermistors. All sensors and thermistors are sold separately. (1) Remote sensor input and (1) ground input; For outdoor remote slab sensor ( CHV‑RSS ) and 10k thermistors sensors and thermistors are sold separately); Each temperature sensor requires a dedicated low-capacitance twisted pair wire (<7 nF per run) and supports a wire length of 500 ft (152 m) using CAT5. Thermostat wire is not recommended, but may be used if necessary at lengths up to 100 ft (30 m).
24 Y Z G (2) 4-pin detachable terminal blocks; Cresnet secondary port with hardwire parallel pass-through
USB (1) Micro B female, USB 2.0 computer console port for firmware download
INTERFACE For future use
Temperature 32° to 104°F (0° to 40°C)
Heat Dissipation 10 BTU/hr maximum; For indoor use only
Housing Plastic
Mounting 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm)
Height 3.68 in. (94 mm)
Width 6.33 in. (161 mm)
Depth 2.34 in. (60 mm)

Kullanım Alanları

  • Kurumsal ve ticari projelerde termostatlar çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron DIN-THSTAT Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Indoor Temperature

32° to 110°F (0° to 43°C)

Outdoor Temperature

-40° to 170°F (-40° to 77°C) NOTE : Outdoor temperature measurement is -30° to 120°F (-34° to 49°C) if thermistor sensors are used.

Humidity

10% to 90% RH (noncondensing)

Auto

38° to 99°F (3° to 37°C)

Heat

38° to 89°F (3° to 32°C)

Cool

59° to 99°F (15° to 37°C)

Power Consumption

3 W (125 mA @ 24VDC)

Cresnet® Wired

Control system integration or networking

Keypad

(1) 5-way navigation pad; For menu navigation and temperature/humidity adjustments

HOME

(1) pushbutton; Returns to the previous screen or the home screen

BACK

(1) pushbutton; Steps menu back one level

Type

RGB LCD

Size

1.80 in. (46 mm) diagonal

Resolution

176 x 220

Function

Front panel display to view temperature and humidity settings; Used for local configuration

Y1, Y2, Y3

(1) Compressor stage 1, 2, and 3

G

(1) Fan relay

B

(1) Active in non-cool modes

O

(1) Active in cool mode

RC

(1) Reference cool

RH

(1) Reference heat

W1, W2, W3

(1) Heat stage 1, 2, and 3

HUM

(1) Humidity call switch power

AUX1, AUX2

(2) Output relay to interface with other HVAC devices

AUX-IN

(1) Signal from HVAC state sensing or other custom programming

TS1, TS2, G

(2) Remote sensor inputs and (2) ground inputs; For indoor remote temperature sensor ( CHV‑RTS ), remote slab sensor ( CHV‑RSS ), remote temperature and humidity sensors ( CHV‑RTHS ), and 10k thermistors (all sensors and thermistors are sold separately); Each temperature sensor requires a dedicated low-capacitance twisted pair wire (<7 nF per run) and supports a wire length of 500 ft (152 m) using CAT5. Thermostat wire is not recommended, but may be used if necessary at lengths up to 100 ft (30 m).

TS3, G

(1) From outdoor remote temperature sensor and (1) ground; Also compatible with 10k thermistors. All sensors and thermistors are sold separately. (1) Remote sensor input and (1) ground input; For outdoor remote slab sensor ( CHV‑RSS ) and 10k thermistors sensors and thermistors are sold separately); Each temperature sensor requires a dedicated low-capacitance twisted pair wire (<7 nF per run) and supports a wire length of 500 ft (152 m) using CAT5. Thermostat wire is not recommended, but may be used if necessary at lengths up to 100 ft (30 m).

24 Y Z G

(2) 4-pin detachable terminal blocks; Cresnet secondary port with hardwire parallel pass-through

USB

(1) Micro B female, USB 2.0 computer console port for firmware download

INTERFACE

For future use

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron DIN-THSTAT — Isıtma, Soğutma ve Bağıl Nem Termostatı, DIN Ray Montajlı” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top