Crestron HD-TX-4KZ-111-1G-W – Bir CATx kablosu üzerinden USB-C® DisplayPort™ sinyalinin no

Bir CATx kablosu üzerinden USB-C® DisplayPort™ sinyalinin noktadan noktaya genişletilmesini sağlamak için DM® Essentials alıcısı veya DMPS Essentials değiştiriciyle birlikte çalışabilirlik. 4K60 4:4:4 videoyu, HDR10+ ve HDCP 2.3’ü destekler. 1 gruplu elektrik kutusuna monte edilir.

Stok kodu: HD-TX-4KZ-111-1G-W Kategoriler:

Bir CATx kablosu üzerinden USB-C® DisplayPort™ sinyalinin noktadan noktaya genişletilmesini sağlamak için DM® Essentials alıcısı veya DMPS Essentials değiştiriciyle birlikte çalışabilirlik. 4K60 4:4:4 videoyu, HDR10+ ve HDCP 2.3'ü destekler. 1 gruplu elektrik kutusuna monte edilir.

Teknik Özellikler

Input Signal Type DisplayPort over USB-C (DisplayPort Alt Mode)
Output Signal Type DM Lite
Copy Protection HDCP 2.3
Resolutions Common resolutions are listed in the following table.
Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
USB-C HDCP 2.3, EDID, CEC pass-through
DM Lite HDCP 2.3, EDID pass-through
USB IN (1) Green LED, indicates that the device is receiving a DisplayPort over USB‑C (DisplayPort Alt Mode) input signal
DM LITE OUT (2) LEDs on RJ‑45 connector. Green indicates that a DM Lite link is established. Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video.
24V 0.75A (1) 2-pin 3.5 mm detachable terminal block; 24VDC power input; Power pack sold separately, required only if the HD-TX-4KZ-111-1G is used with a wall plate receiver 3
Ground (1) Chassis ground lug
LINK (1) Green LED, indicates that a DM Lite link is established.
PWR (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.
Power Pack Input: 100-240VAC Output: 24VDC 0.75A Model: PW-2407WUL (sold separately, required only if the HD-TX-4KZ-111-1G is used with a wall plate receiver) 3
Temperature 32° to 104°F (0° to 40°C)
Humidity 20% to 90% RH (non-condensing)
Composition Metal housing and bracket with white polycarbonate front label overlay
Mounting Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)
Faceplate Requires a decorator style faceplate ( FP-G series, sold separately)
Height 4.12 in. (105 mm)
Width 1.72 in. (44 mm)
Depth 2.19 in. (56 mm)
DM-CBL-ULTRA DM® Ultra Cable DM-CBL-8G DM 8G® Cable or CAT5e (UTP) or Higher

Kullanım Alanları

  • Kurumsal ve ticari projelerde transmitter çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron HD-TX-4KZ-111-1G-W Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Input Signal Type

DisplayPort over USB-C (DisplayPort Alt Mode)

Output Signal Type

DM Lite

Copy Protection

HDCP 2.3

Resolutions

Common resolutions are listed in the following table.

Digital Formats

Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels

USB-C

HDCP 2.3, EDID, CEC pass-through

DM Lite

HDCP 2.3, EDID pass-through

USB IN

(1) Green LED, indicates that the device is receiving a DisplayPort over USB‑C (DisplayPort Alt Mode) input signal

DM LITE OUT

(2) LEDs on RJ‑45 connector. Green indicates that a DM Lite link is established. Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video.

24V 0.75A

(1) 2-pin 3.5 mm detachable terminal block; 24VDC power input; Power pack sold separately, required only if the HD-TX-4KZ-111-1G is used with a wall plate receiver 3

Ground

(1) Chassis ground lug

PWR

(1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.

Power Pack

Input: 100-240VAC Output: 24VDC 0.75A Model: PW-2407WUL (sold separately, required only if the HD-TX-4KZ-111-1G is used with a wall plate receiver) 3

Temperature

32° to 104°F (0° to 40°C)

Humidity

20% to 90% RH (non-condensing)

Composition

Metal housing and bracket with white polycarbonate front label overlay

Mounting

Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)

Faceplate

Requires a decorator style faceplate ( FP-G series, sold separately)

Height

4.12 in. (105 mm)

Width

1.72 in. (44 mm)

Depth

2.19 in. (56 mm)

DM-CBL-ULTRA DM® Ultra Cable

DM-CBL-8G DM 8G® Cable or CAT5e (UTP) or Higher

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron HD-TX-4KZ-111-1G-W – Bir CATx kablosu üzerinden USB-C® DisplayPort™ sinyalinin no” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top