Crestron DIN-1DIM4 — 4 Kanal Dimmer, 1 Besleme, DIN Ray Montajı

4 kanallı karartma, Faz Senkron Algılama Devresi, 120 ila 277VAC 50/60 Hz çalışmaHangi Crestron aydınlatma cihazlarının test edildiğini ve üçüncü taraf aydınlatma armatürleriyle uyumlu olduğunu öğrenmek için Crestron® Aydınlatma Armatür Uyumluluğu sayfasını ziyaret edin.

Stok kodu: DIN-1DIM4 Kategoriler:

4 kanallı karartma, Faz Senkron Algılama Devresi, 120 ila 277VAC 50/60 Hz çalışmaHangi Crestron aydınlatma cihazlarının test edildiğini ve üçüncü taraf aydınlatma armatürleriyle uyumlu olduğunu öğrenmek için Crestron® Aydınlatma Armatür Uyumluluğu sayfasını ziyaret edin.

Öne Çıkan Özellikler

  • 4 kanal karartma
  • 120 ila 240VAC, 50/60 Hz çalışma
  • Seçilebilir loş olmayan mod
  • Birincil hava boşluğu rölesi
  • Girişi geçersiz kıl
  • Cresnet® kablolu iletişim
  • Ön panel veya yazılım aracılığıyla kurulum
  • Crestron® Kontrol Sistemi kullanılarak programlanabilir işlevsellik
  • 12M genişliğinde DIN rayına montaj
  • CEC Başlığı 24 2013 Uyumlu

Teknik Özellikler

Line Power 120 – 277VAC, 50/60Hz
Input Channels 1
Dimmer Channels 4
Maximum Per Channel 5A @ 120 to 277VAC, 50/60 Hz; 600 W @ 120VAC; 1150 W @ 230VAC; 1200 W @ 240VAC; 1385 W @ 277VAC
Module Total 10A @ 120 to 277VAC, 50/60 Hz; 1200 W @ 120VAC; 2300 W @ 230VAC; 2400 W @ 240VAC; 2770 W @ 277VAC
Load Types Leading edge ELV, Incandescent, Neon/Cold Cathode, Magnetic Low Voltage, Dimmable 2‑Wire Fluorescent, and Non-Dim Lighting
Minimum Load 15 W per channel for Incandescent loads; 15 W per channel for Magnetic Low Voltage loads with Halogen or LED Lamps; 15 W for AC Dimmable LED loads operated in Auto/Forward-Phase Mode
Cresnet Cresnet secondary mode
NET (1) Yellow LED; Indicates communication with the control processor
OVERRIDE (2) 2-pin 3.5 mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum Closure Rating: 10mA (per module) at 24V
LIVE (2) Captive screw terminals, brown; Line power connections; Accept up to 12 AWG (2.5 mm²) wires
NEUTRAL (5) Captive screw terminals, blue; Neutral connections; Accept up to 12 AWG (2.5 mm²) wires
DIMMED LIVE 1 – 4 (4) Captive screw terminals, red; Dimmer channel outputs 1 – 4; Accept up to 12 AWG (2.5 mm²) wires
Ground (5) Captive screw terminals, green; Ground connections; Accept up to 12 AWG (2.5 mm²) wires
NET ID (2) 7-Segment green LED digits and (2) miniature pushbuttons; For setting Cresnet ID; digits also display output levels and protection/error codes
SETUP (1) Red LED and (1) recessed miniature pushbutton; For enabling setup mode and touch-settable ID
OVR (1) Red LED and (1) miniature pushbutton; For enabling override mode and saving override presets
PWR (1) Green LED; Lights to indicate AC line power is connected to either LIVE terminal, flashes when only powered by Cresnet
RESET (1) Recessed miniature pushbutton; Resets internal processor
DIM 1 – 4 (4) Red LEDs; Lights when a corresponding channel is operating in forward-phase mode
NON-DIM 1 – 4 (4) Red LEDs; Lights when a corresponding channel is operating in non-dim mode
Channel Mode Select 1 – 4 (4) Recessed miniature pushbuttons; Used to select each channel’s operating mode
LOADS 1 – 4 (4) Red LEDs and (4) miniature pushbuttons; Status indication and local control of each channel
Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (noncondensing)
Heat Dissipation 60 BTU/hr @ 240V with 2 channels 52 BTU/hr @ 120V with 2 channels
Enclosure Aluminum with polycarbonate label overlay
Mounting 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 12 DIN module spaces (216 mm) Sufficient ventilation is required to maintain an ambient temperature not exceeding 104°F (40°C), the unit dissipates significant heat when fully loaded; Maintain 4 in. (102 mm) spacing (minimum) or 6 in. (153 mm) spacing (recommended) above and below for proper ventilation and heat dissipation
Height 3.71 in (95 mm)
Width 8.49 in (216 mm)
Depth 2.35 in (60 mm)

Kullanım Alanları

  • Kurumsal ve ticari projelerde din modules çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron DIN-1DIM4 Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Line Power

120 – 277VAC, 50/60Hz

Input Channels

1

Dimmer Channels

4

Maximum Per Channel

5A @ 120 to 277VAC, 50/60 Hz; 600 W @ 120VAC; 1150 W @ 230VAC; 1200 W @ 240VAC; 1385 W @ 277VAC

Module Total

10A @ 120 to 277VAC, 50/60 Hz; 1200 W @ 120VAC; 2300 W @ 230VAC; 2400 W @ 240VAC; 2770 W @ 277VAC

Load Types

Leading edge ELV, Incandescent, Neon/Cold Cathode, Magnetic Low Voltage, Dimmable 2‑Wire Fluorescent, and Non-Dim Lighting

Minimum Load

15 W per channel for Incandescent loads; 15 W per channel for Magnetic Low Voltage loads with Halogen or LED Lamps; 15 W for AC Dimmable LED loads operated in Auto/Forward-Phase Mode

Cresnet

Cresnet secondary mode

NET

(1) Yellow LED; Indicates communication with the control processor

OVERRIDE

(2) 2-pin 3.5 mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum Closure Rating: 10mA (per module) at 24V

LIVE

(2) Captive screw terminals, brown; Line power connections; Accept up to 12 AWG (2.5 mm²) wires

NEUTRAL

(5) Captive screw terminals, blue; Neutral connections; Accept up to 12 AWG (2.5 mm²) wires

DIMMED LIVE 1 – 4

(4) Captive screw terminals, red; Dimmer channel outputs 1 – 4; Accept up to 12 AWG (2.5 mm²) wires

Ground

(5) Captive screw terminals, green; Ground connections; Accept up to 12 AWG (2.5 mm²) wires

NET ID

(2) 7-Segment green LED digits and (2) miniature pushbuttons; For setting Cresnet ID; digits also display output levels and protection/error codes

SETUP

(1) Red LED and (1) recessed miniature pushbutton; For enabling setup mode and touch-settable ID

OVR

(1) Red LED and (1) miniature pushbutton; For enabling override mode and saving override presets

PWR

(1) Green LED; Lights to indicate AC line power is connected to either LIVE terminal, flashes when only powered by Cresnet

RESET

(1) Recessed miniature pushbutton; Resets internal processor

DIM 1 – 4

(4) Red LEDs; Lights when a corresponding channel is operating in forward-phase mode

NON-DIM 1 – 4

(4) Red LEDs; Lights when a corresponding channel is operating in non-dim mode

Channel Mode Select 1 – 4

(4) Recessed miniature pushbuttons; Used to select each channel’s operating mode

LOADS 1 – 4

(4) Red LEDs and (4) miniature pushbuttons; Status indication and local control of each channel

Temperature

32° to 104°F (0° to 40°C)

Humidity

10% to 90% RH (noncondensing)

Heat Dissipation

60 BTU/hr @ 240V with 2 channels 52 BTU/hr @ 120V with 2 channels

Enclosure

Aluminum with polycarbonate label overlay

Mounting

35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 12 DIN module spaces (216 mm) Sufficient ventilation is required to maintain an ambient temperature not exceeding 104°F (40°C), the unit dissipates significant heat when fully loaded; Maintain 4 in. (102 mm) spacing (minimum) or 6 in. (153 mm) spacing (recommended) above and below for proper ventilation and heat dissipation

Height

3.71 in (95 mm)

Width

8.49 in (216 mm)

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron DIN-1DIM4 — 4 Kanal Dimmer, 1 Besleme, DIN Ray Montajı” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top