Crestron AMP-X500 — X Serisi Amplifikatör, 500 W

X Serisi Amplifikatör, 500 W

Stok kodu: AMP-X500 Kategoriler:

AMP-X500 yüksek performanslı, kompakt, enerji tasarruflu, profesyonel kalitede bir amplifikatördür. Lo-Z ve Hi-Z çalışmasını destekleyen bu çok kanallı amplifikatör, hem konut hem de ticari konfigürasyonlara uygundur.

Teknik Özellikler

Input Signal Types Balanced or unbalanced analog line-level
Output Power Per Channel (RMS, continuous up to 10 seconds) 250 W (4 or 8 Ω), 500 W (8 Ω only), 500 W (70V/100V) NOTE: Total simultaneous output power across all channels will not exceed 500 W
Frequency Response 20 Hz to 20 kHz ±0.5 dB at 1 W
High-Pass Filter (70V and 100V operation only) -3 dB @ 80 Hz, -12 dB/octave
THD+N <0.1% at 1 kHz @ -3 dB full rated output power
S/N Ratio >103 dBA, 20 Hz to 20 kHz, balanced
Crosstalk -75 dB at 1 kHz
Input Sensitivity 1.23 Vrms, +4 dBu balanced; 0.316 Vrms, -10 dBV unbalanced
Gain 29 dB @ 8 Ohms
Protection Overcurrent, under voltage, over temperature, DC offset, extreme high frequency
Go to Sleep Time 25 minutes with no signal present (when set to POWER SAVER)
Wake Time 0.5 s typical
Wake Threshold 0.44 mV typical
CH1-CH2 (OUTPUT) (2) 2‑pin 5.08 mm pitch, 12A plug with screw locking retainers; Power amplifier output; Wire Size: Terminals accept up to 12 AWG (3.31 mm) NOTE: Output is direct‑coupled, not transformer isolated.
AUDIO IN (UNBALANCED) (2) RCA connectors, female; Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu)
AUDIO IN (BALANCED) (2) 3-pin 3.5 mm detachable terminal block; Balanced line‑level audio inputs; Maximum Input Level: 7.75 Vrms, +20 dBu; Input Impedance: 20 kΩ
BUS INPUT (2) paired RCA connectors, female; Unbalanced line-level audio inputs
BUS OUTPUT (2) paired RCA connectors, female; Unbalanced line-level audio outputs, buffered
REMOTE (1) 2-pin 3.5 mm detachable terminal block; Connect to dry contact closure to place amplifier in standby mode
Chassis Ground (1) 6‑32 screw; Chassis ground lug
100‑240V~ 1.2-0.6A 50/60 Hz (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included
PWR (1) White/Red LED; White indicates amplifier is on and ready for use; Red indicates amplifier is in standby
HI-Z (2) White LEDs (one per output); Indicates when Hi-Z mode is enabled (70V or 100V);
SIGNAL (2) White LEDs (one per output); Indicates when an audio signal is present
FAULT (2) Red LEDs (one per output); Indicates that the output channel is faulted or clipping
GAIN 1-2 (2) Screwdriver‑adjustable rotary controls, one per output channel; Adjusts the attenuation level for the corresponding output channel
INPUT SEL 1-2 (2) Rotary controls, one per output channel; Selects input source from RCA, Balanced, BUS left/right, or BUS mono.
OUTPUT 1-2 (2) Rotary controls, one per output channel; Selects 4-8 Ω 250 W, 8 Ω 500W, 70V, or 100V operation.
Power Mode (1) Slide switch; Selects Power Saver or Always On operation
Main Power 1.2-0.6A @ 100‑240VAC, 50/60 Hz
Power Consumption 115 W, (2 channels driven at 1/8th output power, 4 Ω); 8.8 W, idle; 0.31 W, power saver (115VAC/60 Hz)
Temperature 41 to 104°F (5° to 40°C)
Humidity 10% to 90% RH (non‑condensing)
Heat Dissipation 149 BTU/hr @ 4 Ω, all channels driven at 1/8th output power; 21 BTU/hr all channels idle; 1 BTU/hr in standby
Chassis Metal, convection cooled (fanless)
Front Panel Metal, black finish with polycarbonate label overlay
Mounting Freestanding or 1 RU 19 in. rack mountable; Stackable with other Crestron AMP series products (adhesive feet and rack mounting hardware all included)
Height 1.75 in (44 mm) without feet; 1.89 in (48 mm) with feet
Width 19.00 in (483 mm)
Depth 14.57 in (370 mm)

Kullanım Alanları

  • Kurumsal ve ticari projelerde amplifikatörler çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron AMP-X500 Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Input Signal Types

Balanced or unbalanced analog line-level

Output Power Per Channel (RMS, continuous up to 10 seconds)

250 W (4 or 8 Ω), 500 W (8 Ω only), 500 W (70V/100V) NOTE: Total simultaneous output power across all channels will not exceed 500 W

Frequency Response

20 Hz to 20 kHz ±0.5 dB at 1 W

High-Pass Filter (70V and 100V operation only)

-3 dB @ 80 Hz, -12 dB/octave

THD+N

<0.1% at 1 kHz @ -3 dB full rated output power

S/N Ratio

>103 dBA, 20 Hz to 20 kHz, balanced

Crosstalk

-75 dB at 1 kHz

Input Sensitivity

1.23 Vrms, +4 dBu balanced; 0.316 Vrms, -10 dBV unbalanced

Gain

29 dB @ 8 Ohms

Protection

Overcurrent, under voltage, over temperature, DC offset, extreme high frequency

Go to Sleep Time

25 minutes with no signal present (when set to POWER SAVER)

Wake Time

0.5 s typical

Wake Threshold

0.44 mV typical

CH1-CH2 (OUTPUT)

(2) 2‑pin 5.08 mm pitch, 12A plug with screw locking retainers; Power amplifier output; Wire Size: Terminals accept up to 12 AWG (3.31 mm) NOTE: Output is direct‑coupled, not transformer isolated.

AUDIO IN (UNBALANCED)

(2) RCA connectors, female; Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu)

AUDIO IN (BALANCED)

(2) 3-pin 3.5 mm detachable terminal block; Balanced line‑level audio inputs; Maximum Input Level: 7.75 Vrms, +20 dBu; Input Impedance: 20 kΩ

BUS INPUT

(2) paired RCA connectors, female; Unbalanced line-level audio inputs

BUS OUTPUT

(2) paired RCA connectors, female; Unbalanced line-level audio outputs, buffered

REMOTE

(1) 2-pin 3.5 mm detachable terminal block; Connect to dry contact closure to place amplifier in standby mode

Chassis Ground

(1) 6‑32 screw; Chassis ground lug

100‑240V~ 1.2-0.6A 50/60 Hz

(1) IEC 60320 C14 main power inlet; Mates with removable power cord, included

PWR

(1) White/Red LED; White indicates amplifier is on and ready for use; Red indicates amplifier is in standby

HI-Z

(2) White LEDs (one per output); Indicates when Hi-Z mode is enabled (70V or 100V);

SIGNAL

(2) White LEDs (one per output); Indicates when an audio signal is present

FAULT

(2) Red LEDs (one per output); Indicates that the output channel is faulted or clipping

GAIN 1-2

(2) Screwdriver‑adjustable rotary controls, one per output channel; Adjusts the attenuation level for the corresponding output channel

INPUT SEL 1-2

(2) Rotary controls, one per output channel; Selects input source from RCA, Balanced, BUS left/right, or BUS mono.

OUTPUT 1-2

(2) Rotary controls, one per output channel; Selects 4-8 Ω 250 W, 8 Ω 500W, 70V, or 100V operation.

Power Mode

(1) Slide switch; Selects Power Saver or Always On operation

Main Power

1.2-0.6A @ 100‑240VAC, 50/60 Hz

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron AMP-X500 — X Serisi Amplifikatör, 500 W” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top