Crestron DIN-DLI — DALI® Arayüzü, DIN Ray Montajı

DIN-DLI, Crestron kontrol sistemleri için bir DALI döngüsünün kontrolünü sağlayan DALI-2™ sertifikalı bir DALI® arayüzüdür.

Stok kodu: DIN-DLI Kategoriler:

DIN-DLI, Crestron kontrol sistemleri için bir DALI döngüsünün kontrolünü sağlayan DALI-2™ sertifikalı bir DALI® arayüzüdür.

Öne Çıkan Özellikler

  • Bağımsız bir DALI® döngüsüne sahip arayüzler
  • DALI-2™ sertifikalı
  • DT0, DT1, DT2, DT3, DT4, DT5, DT6, DT7 ve DT8 Tc DALI Cihazlarını destekler
  • 64'e kadar DALI cihazını kontrol eder
  • Ethernet veya Cresnet® kablolu iletişim
  • Tek kablolu kurulum için Cresnet ağı veya PoE kullanarak güç
  • İletişim için DALI döngü gücü1 sağlar
  • Kolay kurulum için Web kullanıcı arayüzü aracılığıyla devreye alındı
  • Sahne Yaklaşımı aracılığıyla hızlı renk sıcaklığı kontrolü
  • Girişi geçersiz kıl
  • Cresnet aracılığıyla çalıştırıldığında devreye alma için yerel doğrudan bağlantıyı bir PC'ye bağlayın
  • 3M genişliğinde DIN rayına montaj
  • Crestron Home® İşletim Sistemiyle çalışır
  • Bilgisayar olmadan kablolamayı test edin ve sürücü değişimini gerçekleştirin

Teknik Özellikler

Cresnet Power Usage 6W (250mA @ 24V)
PoE Power Usage IEEE 802.3af (802.3at Type 1) Class 2 PoE Powered Device (6.5W)
DALI Loop Maximum: 0.25A
DALI Devices 64
Load Types DALI devices DT0, DT1, DT2, DT3, DT4, DT5, DT6, DT7, and DT8 Tc
Power Supply 1 Continuous: 0.17A
Cresnet Cresnet secondary mode
Ethernet 100BASE-TX; IEEE 802.3af (802.3at Type 1) Class 2 PoE Powered Device (6.5W); MbedTLS encryption; Authentication prompted on first connection; Link-local direct connection to a PC for commissioning when powered via Cresnet
DALI (1) Yellow LED; LED lights to indicate DALI power, communication, and error
Module to Module (2) Module to module connectors; Provides Cresnet and Override to connected modules
NET (1) Yellow LED; Indicates communication with the control processor
OVERRIDE (2) 2-pin 3.5 mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum contact closure rating: 10mA (per module) at 24V
LAN PoE (1) 8-pin RJ-45, female; 100BASE-TX Ethernet port; Green and yellow LEDs indicate Ethernet port status; Cresnet network power disables PoE power; Link-local direct connection to a PC for commissioning when powered via Cresnet
DA+ / DA- (2) 2-pin 3.5 mm spring terminals, paralleled; Control a single DALI loop; A DALI loop controls up to 64 drivers; 3kVAC isolation from Cresnet (NET) and Ethernet (LAN PoE) ports; Wire Gauge: 12-24 AWG solid wire or 14-24 AWG stranded wire
OVR (1) Red LED and (1) push button; For enabling override mode
PWR (1) Green LED; Indicates power to device
RESET (1) Recessed miniature push button; Resets internal processor on momentary push; Hold for ten seconds to perform a factory restore
TEST (1) Push button; Provides local control of the lights on momentary push; Hold to initiate a single device replacement
Local In-cabinet Air Temperature 32° to 122 °F (0° to 50°C)
Humidity 10% to 90% RH (noncondensing)
Heat Dissipation 13.6 BTU/hr
Enclosure Light gray polycarbonate housing with polycarbonate label overlay
Mounting 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 3 DIN module spaces (54 mm)
Height 3.68 in. (93.70 mm)
Width 2.08 in. (52.83 mm)
Depth 2.32 in. (59 mm)

Kullanım Alanları

  • Kurumsal ve ticari projelerde din modules çözümü
  • Toplantı odaları, akıllı binalar ve otomasyon sistemlerine entegrasyon
  • Profesyonel kurulum ve merkezi yönetim

Sıkça Sorulan Sorular

Crestron DIN-DLI Türkiye’de satılıyor mu?

Evet. Avelkon, Crestron Türkiye yetkili distribütörüdür. Stok, fiyat ve proje teklifi için bizimle iletişime geçebilirsiniz.

Teknik destek ve kurulum sağlanıyor mu?

Evet, yetkili distribütör olarak ürün seçimi, kurulum ve satış sonrası destek sunuyoruz.

Avelkon, Crestron Türkiye yetkili distribütörüdür. Fiyat ve proje teklifi için iletişime geçin.

Marka

Crestron

Cresnet Power Usage

6W (250mA @ 24V)

PoE Power Usage

IEEE 802.3af (802.3at Type 1) Class 2 PoE Powered Device (6.5W)

DALI Loop

Maximum: 0.25A

DALI Devices

64

Load Types

DALI devices DT0, DT1, DT2, DT3, DT4, DT5, DT6, DT7, and DT8 Tc

Power Supply 1

Continuous: 0.17A

Cresnet

Cresnet secondary mode

Ethernet

100BASE-TX; IEEE 802.3af (802.3at Type 1) Class 2 PoE Powered Device (6.5W); MbedTLS encryption; Authentication prompted on first connection; Link-local direct connection to a PC for commissioning when powered via Cresnet

DALI

(1) Yellow LED; LED lights to indicate DALI power, communication, and error

Module to Module

(2) Module to module connectors; Provides Cresnet and Override to connected modules

NET

(1) Yellow LED; Indicates communication with the control processor

OVERRIDE

(2) 2-pin 3.5 mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum contact closure rating: 10mA (per module) at 24V

LAN PoE

(1) 8-pin RJ-45, female; 100BASE-TX Ethernet port; Green and yellow LEDs indicate Ethernet port status; Cresnet network power disables PoE power; Link-local direct connection to a PC for commissioning when powered via Cresnet

DA+ / DA-

(2) 2-pin 3.5 mm spring terminals, paralleled; Control a single DALI loop; A DALI loop controls up to 64 drivers; 3kVAC isolation from Cresnet (NET) and Ethernet (LAN PoE) ports; Wire Gauge: 12-24 AWG solid wire or 14-24 AWG stranded wire

OVR

(1) Red LED and (1) push button; For enabling override mode

PWR

(1) Green LED; Indicates power to device

RESET

(1) Recessed miniature push button; Resets internal processor on momentary push; Hold for ten seconds to perform a factory restore

TEST

(1) Push button; Provides local control of the lights on momentary push; Hold to initiate a single device replacement

Local In-cabinet Air Temperature

32° to 122 °F (0° to 50°C)

Humidity

10% to 90% RH (noncondensing)

Heat Dissipation

13.6 BTU/hr

Enclosure

Light gray polycarbonate housing with polycarbonate label overlay

Mounting

35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 3 DIN module spaces (54 mm)

Height

3.68 in. (93.70 mm)

Width

2.08 in. (52.83 mm)

Depth

2.32 in. (59 mm)

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“Crestron DIN-DLI — DALI® Arayüzü, DIN Ray Montajı” için yorum yapan ilk kişi siz olun

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Scroll to Top